Запчасти рулевого управленияعرض واحد لـ Toyota Yaris 2024 — 2026, فيس ليفت IV في الشرق الأوسط (GCC)

HARDRACE Q0943 Rear Lower Rear Chassis Brace, 2pcs for TOYOTA GR Yaris 2020- / GR Corolla 2022- The Hardrace rear lower brace for the Toyota GR Yaris is designed to reinforce the chassis by reducing flex and structural deflection under dynamic driving conditions. By strengthening the lower

HARDRACE Q0882 Front Radiator Brace for TOYOTA GR Yaris 2020- The Hardrace front radiator brace is engineered to reinforce the front chassis structure by reducing flex and improving overall rigidity. By strengthening the connection points at the front end, it enhances stability during high

HARDRACE Q0883 Front Subframe Brace for TOYOTA GR Yaris 2020- The Hardrace front subframe brace for the Toyota GR Yaris is designed to reinforce the chassis by reducing flex and structural deflection. By strengthening the subframe area, it enhances rigidity under high-speed driving and agg

HARDRACE Q1098 Front Lower Control Arm (Pillow Ball) 2pcs for TOYOTA GR Yaris 2020- The Hardrace adjustable front lower arm for the Toyota GR Yaris is engineered to provide full adjustability of front suspension geometry, allowing precise tuning of camber and caster settings. This enables

HARDRACE Q1128 Rear Trailing Arm Bushing Kit (Harden Rubber), 2pcs for TOYOTA GR Yaris 2020- / GR Corolla 2022- The Hardrace hardened rubber bushing is designed to improve suspension performance by reducing unwanted movement under load. Manufactured from high-strength, anti-crack rubber ma

HARDRACE Q0902 Front Strut Mount, 2pcs for TOYOTA GR Yaris 2020- The Hardrace reinforced strut mount is designed to provide a stable and vibration-isolated connection between the suspension and chassis. It acts as a buffer to reduce noise and absorb road impacts, improving overall driving

HARDRACE Q0896 Rear Lower Arm Bushing Kit (Harden Rubber), 2pcs for TOYOTA GR Yaris 2020- The Hardrace reinforced rubber bushings are designed to enhance suspension stability by reducing unwanted movement under load. Manufactured from high-strength, anti-crack hardened rubber, they provide

HARDRACE Q0810 Rear Sway Bar, 25.4mm for TOYOTA GR Yaris 2020- / GR Corolla 2022- The Hardrace sway bar is designed to improve vehicle handling by reducing body roll and stabilizing the chassis during cornering. By linking the suspension components across the axle, it helps maintain a flat

HARDRACE Q0897 Front Lower Ball Joint, 2 pcs for TOYOTA GR Yaris 2020- The Hardrace camber adjustable ball joints for the Toyota GR Yaris are designed to provide precise front camber adjustment for optimized suspension geometry. Featuring a slotted mounting hole design, they allow fine tun

HARDRACE Q0891 Rear Trailing Arm Bushing (Pillow Ball), 2pcs for TOYOTA GR Yaris 2020- / GR Corolla 2022- The Hardrace pillow ball bushing is designed to improve steering precision and suspension feedback by replacing standard rubber bushings with a solid spherical bearing configuration. T

HARDRACE Q0892 Rear Lower Arm Bushing Kit (Pillow Ball), 2pcs for TOYOTA GR Yaris 2020- / GR Corolla 2022- The Hardrace pillow ball bushing is engineered to enhance steering precision and suspension feedback by replacing compliant rubber bushings with a solid spherical bearing design. This

HARDRACE Q0894 Front Lower Arm Front Bushing Kit (Harden Rubber), 2pcs for TOYOTA GR Yaris 2020- The Hardrace reinforced rubber bushings are designed to enhance suspension stability by minimizing unwanted movement under load. Manufactured from high-strength, anti-crack hardened rubber, the

HARDRACE Q0809 Front Sway Bar, 25.4mm for TOYOTA GR Yaris 2020- The Hardrace sway bar is engineered to enhance vehicle handling by reducing body roll and improving stability during cornering. By linking the suspension components across the axle, it helps maintain a flatter chassis profile,

HARDRACE Q0791 Rear Toe Kit (Pillow Ball), 2pcs for TOYOTA GR Yaris 2020- / GR Corolla 2022- The adjustable rear toe kit is designed to provide precise control over rear toe alignment, allowing fine tuning of toe-in and toe-out settings. It supports both performance-oriented handling adjus

HARDRACE Q0895 Front Lower Arm Rear Bushing Kit (Harden Rubber), 2pcs for TOYOTA GR Yaris 2020- / GR Corolla 2022- The Hardrace reinforced rubber bushings are engineered to enhance suspension stability by reducing unwanted movement under load. Manufactured from high-strength, anti-crack ha

Full Length Adjustable Height Case and Bottom Bracket Allows for a wide range of ride height requiements and set independently from spring seat height and pre-preload settings. This allows a much greater flexibility with different springs, and accomodate exact piston stroke range. Upper Mo

HARDRACE Q1340 Rear Upper Camber Kit (Pillow Ball), 2pcs for TOYOTA GR Yaris 2020- / GR Corolla 2022- The Hardrace rear camber kit is designed to provide precise adjustment of rear camber angles, allowing optimization of vehicle alignment for improved performance or restoration of factory

Adjustable rear stabilizer bar kit replaces part 1K0505465AA. Features CNC machined aluminum, anodized black. M12x1.25 M12x1.25 racing Teflon rod ends. Not made in China. Metal bushings are galvanized black. 10.9 grade bolts. Rubber stem lugs.

Price is per pair (for one car). Product functionalities: Toe adjustability. Stiffer and stronger than OEM part – designed to withstand track racing and rally abuse Uses uniballs which eliminates rubber bushings deflection and gives much more direct and predictable response. Features: Lock

Price is per pair (for one car). Product functionalities: Stiffer and stronger than OEM – designed to withstand all track racing and rally abuse. Gives more toe adjustment range. Uses spherical bearings which give direct and predictable steering response. Features: Precisely CNC machined o

True adjustable aluminium front wishbones is finally available. Product functionalities: Camber adjustability ( /- 1,5 degree). Caster adjustability ( /- 5 degree). Anti-dive and anti-lift adjustability ( /- 16,5 p.p. of anti-dive). Uses uniballs which eliminates rubber bushings deflection

Product Features: Additional (modified) suspension mounting points (cross arms, steering rack, anti-sway bar) to improve suspension kinematics for lowered race cars. The single subframe position eliminates subframe misalignment under the car. No subframe retainer kit / offset clamp kit req

Product functionalities: Additional (revised) suspension mounting points for improved suspension kinematics for lowered cars with racing or track purpose Bump steer adjustability One mounting subframe position eliminates subframe shifting under the car. No need for subframe locking kit / d

Product functionalities Improved OEM kinematics for track racing and rally use. Uses spherical bearings which eliminates rubber bushings deflection and gives much more direct and predictable response. Works with increased shock travel. Works with OEM wheel speed sensors. Fits 15” wheels. F