بيع سيارات جديدة ومستعملة Ford Taurus 2014 في الشرق الأوسط (GCC)

Ford Taurus، 4 فلاتر

لم يتم العثور على شيء

يرجى تغيير الفلاتر لإيجاد الإعلانات التي تحتاجها.

أسعار فئات Ford Taurus في دول مجلس التعاون الخليجي (GCC)

يبدأ سعر Ford Taurus من 19,500 AED ويصل إلى 163,000 AED. قد تختلف التكلفة النهائية على الطريق قليلاً حسب التأمين والتسجيل والملحقات الاختيارية.

ديناميكيات الأسعار والسيولة Ford Taurus

يوضح الرسم البياني ديناميكيات متوسط سعر الطراز في سوق السيارات المستعملة خلال العام الماضي. تساعدك هذه البيانات على تقييم جدوى الشراء وتوقع القيمة المستقبلية للسيارة.

قد تختلف الأسعار على AUTO.AE عن تكلفة البيع الفعلية. تستند البيانات إلى قاعدة بياناتنا من السيارات المباعة والإعلانات الحالية. للحصول على تقييم دقيق، استخدم أداتنا.

أخبار Ford Taurus

عرض الكل 62
  • ‌

    How Often Should You Change the Oil Filter on a Ford Taurus?

    Replace the Ford Taurus oil filter with the engine oil. Confirm the schedule for your version: general regional Ford oil guidance states 8,000 km or six months, while local scheduled servicing guidance states 10,000 km or six months. Traffic, extended idling and dusty routes require separate consideration. Mileage alone is not enough to plan maintenance. Key point. Select the filter by VIN and engine, renew it during the oil service and check for leaks afterwards. Topping up, resetting a reminder and making fewer journeys do not replace maintenance. EcoBoost, hybrid and older Taurus vehicles cannot automatically share the same consumables or intervals. 4 Reasons to Inspect the Ford Taurus Oil Filter You should not wait for obvious blockage symptoms before every replacement: the condition of the filter media is usually impossible to assess without dismantling it. Establish the interval in advance and treat unusual symptoms as reasons to investigate the lubrication system. Neither noise nor dark oil alone establishes a faulty filter. Start with the last service records and your observations. • You cannot establish when the filter was last replaced. A mileage sticker and reset reminder do not confirm the work performed. Find an invoice identifying the date, odometer reading and consumable part number. If a used Taurus has no recoverable history, arrange an initial oil-and-filter service after inspection. This provides a documented starting point for subsequent maintenance. • Fresh oil appears around the filter connection. Possible causes include incorrect fitting, a damaged seal or a neighbouring leak running down towards the assembly. Oil on the undertray may also remain after a service spill. The workshop should clean the area and establish where fresh oil returns. Do not leave rapidly increasing leakage until the next scheduled replacement. • The oil-pressure warning stays on with the engine running. Stop safely and switch off the engine. Checking the level matters, but a normal dipstick reading does not establish adequate pressure. Identify the cause before further operation: leakage, interrupted supply, a sensor fault and other problems are possible. Fitting another filter without investigation does not replace pressure measurement and diagnosis. • A metallic knock or unfamiliar noise appears after servicing. Explain whether it began at the first start, after parking or during a journey. The timing helps guide inspection but does not prove that the consumable is responsible. Switch off if noise accompanies an oil-pressure warning; do not raise engine speed in an attempt to force oil through the system. Why Identical Mileage Can Represent Different Conditions Daily Taurus use may involve waiting with the engine running, crawling through traffic and completing several short journeys. The odometer records little distance during these periods even though the engine continues operating. When planning maintenance, describe an ordinary day: journey duration, stationary time with air conditioning operating and how often congestion interrupts your route. Regular motorway journeys at a comparatively steady load represent a different pattern. Comparing them with hours of urban operation using distance alone misses useful information. The oil-service page on me.ford.com identifies extended idling, slow driving and dust among tougher conditions. More frequent maintenance is recommended in those circumstances; confirm the actual shortened interval for the individual vehicle. Why Fresh Oil Should Not Be Paired with an Old Filter The explanation on mann-filter.com notes that changing the oil also requires a new filter because captured contamination remains in the media. Draining the sump does not clean the element’s folds. Fresh fluid combined with an old filter therefore does not give the system a complete new service interval: the consumable has already accumulated contamination and used part of its holding capacity. As resistance through the media increases, a bypass valve, where provided in the design, can route flow around the element. Its purpose is to preserve oil supply at the relevant pressure difference. This is a protective mechanism, not permission to continue using a contaminated filter. Oil colour and an ordinary dashboard reminder cannot reliably reveal the position of that valve. The technical description on motorcraft.com separately explains the anti-drainback valve, which helps retain oil after the engine stops. Bypass and anti-drainback valves serve different purposes. Consequently, filters that look similar are not necessarily interchangeable. Selection depends on verified specifications for the engine as well as the thread and external dimensions. What Changes for EcoBoost and Hybrid Taurus Versions? The current model description on me.ford.com includes a 2.0-litre EcoBoost and a 1.5-litre hybrid. A hybrid still has a combustion engine that needs oil and a filter. Time spent travelling on electric power does not independently justify extending the calendar service deadline. In a turbocharged engine, stable lubrication also matters to turbocharger components; choosing oil by price or viscosity alone is insufficient. Important. A service reminder concerns planned maintenance. A low oil-pressure warning with the engine running requires a safe stop and engine shutdown. These messages are not interchangeable and should not simply be cleared so that the journey can continue. How to Establish the Interval and Select a Taurus Filter The servicing FAQ on premier-motors.ae states a general schedule of 10,000 km or six months for Ford vehicles from the 2009 model year onwards. It also identifies exceptions for particular models and severe operation. This is a starting point for discussing scheduled servicing, rather than confirmation of an identical oil-change interval for every Taurus. The Oil Change page on me.ford.com gives a different general oil-service guideline: 8,000 km or six months. The table distinguishes the purpose of these recommendations; do not select the larger number without checking. Ask the workshop to confirm the oil-and-filter interval by VIN and record both the date and mileage limit. Applicable vehicle-specific service documents take priority over general guidance. How to Calculate the Next Replacement Suppose your Taurus has a confirmed interval of 8,000 km or six months and the oil and filter were replaced at 40,000 km. The next distance limit is 48,000 km. If the odometer reads only 43,000 km after six months, the calendar deadline still applies. Equally, reaching 48,000 km sooner means there is no reason to wait for the later date. If the car regularly completes short trips, waits for passengers or follows dusty routes, discuss those conditions before the next interval begins. Do not assign an arbitrary 5,000 km limit to every Taurus simply because the climate is hot. Obtain an appropriate schedule and follow it consistently. Review the plan when use changes, such as starting daily work in city traffic. What Information to Provide When Ordering an Oil Filter Supply the VIN, model year, engine details and hybrid identification where applicable. Confirm the genuine part number and any accepted supersession. A listing described only as suitable for Ford Taurus lacks enough detail. A component for an older Taurus or another EcoBoost model needs a new application check, even when it appears identical. The regional filter-replacement guidance on me.ford.com emphasises meeting original-equipment requirements. Choose a component with traceable provenance and documented application data. Comparing packaging and markings with the invoice is useful, but appearance alone does not guarantee authenticity. A dented case, damaged seal or contamination inside the inlet openings is reason to reject that particular filter before installation. How Oil, the Filter and the Service Reminder Work Together The filter retains particles while the oil provides lubrication; a fresh element does not restore the properties of used fluid. Before work, establish the viscosity, Ford specification and service-fill quantity for the exact engine. Do not automatically transfer figures from an earlier Taurus or another engine. Verify the actual level after filling the system: a reference capacity does not replace that procedure. Where an oil-service reminder is fitted, reset it only after the work is completed. A remaining-life display neither confirms physical filter replacement nor measures contamination inside it. After an accidental reset, recover the date and mileage from service records and establish the next replacement. A freshly reset counter does not justify extending the existing interval. When choosing a car, compare current offers for Ford Taurus alongside its maintenance history. Request invoices from several consecutive services: they help establish the actual intervals, consumables used and consistency of oil changes. One recent stamp does not explain previous care. Account for missing documentation in the budget for inspection and initial servicing after purchase. What to Check During Installation and After Replacement A good consumable cannot compensate for incorrect assembly. Before fitting, inspect the mounting surface, remove the old seal and follow the procedure for that exact assembly. After starting, check for leaks and dashboard warnings, then measure the level using the vehicle procedure. The table helps explain an observation to the workshop; inspection and, where necessary, pressure measurements establish the cause. Checklist When Collecting the Car Agree the work before servicing: the oil brand and specification, filter number, seals and leak checks. If replacement of a housing or another assembly is proposed, ask to see the defect and understand its connection with the complaint. Hybrid preparation must follow instructions that prevent unintended engine starting. Any access beneath the car requires safe lifting equipment. ☐ The invoice records the date, mileage, engine and filter part number, with fitment confirmed for this VIN. ☐ Required new seals are fitted, the old gasket has been removed, and the mounting surface and housing are checked. ☐ The filter connection and drain plug have been checked after starting; there is no fresh leak or oil-pressure warning. ☐ The level has been measured on flat ground after the prescribed wait, using the vehicle instructions; shortage and overfilling are corrected. ☐ Oil specification and quantity, next service date and mileage limit are recorded; the reminder is reset after actual replacement. Errors That Undermine an Oil Service With a spin-on filter, check particularly carefully that the old gasket has not remained on the engine. A doubled seal can compromise leak-tightness. For a cartridge assembly, inspect the correct ring groove and cap condition. Identify the design from the vehicle. Follow the specified seal preparation and tightening procedure: no universal torque or number of turns covers every Taurus filter. • Keeping the old filter to save money. Renew the element whenever the oil reaches its replacement deadline. Washing or blowing out a disposable filter does not establish restored capacity or suitability for another interval. • Trying to cure a leak by tightening further. First establish the condition of the thread, gasket and mounting surface. Excessive force can damage the housing and complicate the next replacement without correcting the original cause. • Treating a top-up as a new service. Adding oil restores the quantity but does not remove accumulated contamination from the filter. If top-ups recur, record the quantity and mileage, then investigate why the oil is being lost. • Selecting oil by its SAE marking alone. Check Ford quality and application requirements separately. Hot weather does not automatically justify thicker oil, and a more expensive filter cannot correct an unsuitable fluid specification. After collection, watch for new marks beneath the car and changes in oil level. Repeat measurements under comparable conditions to avoid misleading differences. Dark colour alone does not measure the filter’s remaining life. When contacting the workshop, the service date, mileage, top-up quantities and the timing of symptoms are more useful than a photograph of the oil. Conclusion Replace the Ford Taurus oil filter with the oil on the schedule for its exact version. Distinguish general servicing intervals from oil-service deadlines and account for urban use and elapsed time. VIN-based selection, correct installation and checks after replacement help make maintenance predictable and prevent mistakes with consumables.

  • ‌

    Ford Taurus: when to change the engine oil

    Change the engine oil in a Ford Taurus together with the filter according to the individual vehicle's schedule, allowing for mileage, elapsed time and operating conditions. Ford's general UAE advice gives a reference of 8,000 km or six months, whichever comes first. This is not one factory interval for every Taurus: confirm the model year, engine and applicable regional maintenance requirements before servicing. Identify the version first. The current Taurus range on me.ford.com includes 2.0 EcoBoost and 1.5 Hybrid powertrains. Earlier vehicles also appear on the used market. The same model name does not establish identical oil requirements. Check viscosity, the Ford specification and refill capacity against your vehicle's documentation and VIN. Five reasons to check the oil and service date The calendar or mileage limit has arrived. Find the most recent invoice confirming an oil and filter change. Calculate the next due point from the work actually completed, rather than the purchase date or last workshop visit. Even a lightly used car has a calendar limit: a few short journeys each week do not make the oil a lifetime consumable. A message requests an oil change. Record the exact wording and odometer reading. A service reminder, an oil-life estimate and an oil-pressure warning have different meanings. Read the complete message before deciding what action it requires. Clearing a notification does not service the vehicle and may remove useful information that another driver needs to see. The previous maintenance history cannot be verified. After buying a used Taurus, an under-bonnet sticker or a seller's recollection may not establish which oil was used or whether the filter was replaced. Ask for an itemised invoice. If reliable records are unavailable, arrange an assessment and appropriate baseline servicing so that you have a clear starting point for your own history. The level changes or signs of a leak appear. Repeat the measurement on level ground using your vehicle's prescribed procedure. If the drop is confirmed, record mileage and top-up quantity. Spots beneath the engine, oily connections or a recurring need to add oil call for investigation. Fresh oil does not repair a leaking seal. There is an unfamiliar noise, smell or smoke. These symptoms need diagnosis rather than an automatic switch to thicker oil. Ford's engine-service guidance identifies leaks, loud engine noises and smoke from beneath the bonnet as reasons to seek service. Explain whether the issue occurs after starting, in traffic, during acceleration or after stopping, rather than guessing which component is responsible. Why low urban mileage does not always mean easy use For a Taurus used for the daily commute, the complete journey matters. Twenty kilometres on an open road and the same distance with long waits and repeated stops add equally to the odometer, but involve different engine running times. When discussing the service interval, describe the usual journey duration and conditions as well as the distance covered each month. Pay particular attention to a combination of short trips, stationary running and dusty approaches to parking areas. Hot weather alone does not establish an arbitrary universal interval. The workshop should compare the actual operating pattern with the requirements for your version. If the routine changes from motorway journeys to frequent local errands, review the plan before the next deadline arrives. In a hybrid Taurus, some movement can take place without the petrol engine running. That does not justify extending the oil interval in proportion to fuel savings or time spent driving electrically. The hybrid has its own documentation. A schedule for the conventional 2.0 EcoBoost should not automatically be treated as its maintenance plan, even where the two cars look similar. What happens when an oil change is delayed? Oil maintains a protective film between moving parts, helps carry away heat and holds contaminants. Its properties gradually change during use. Scheduled replacement refreshes the oil before a problem becomes noticeable through the way the engine behaves. An instrument panel without fault messages is not evidence that the maintenance interval can be extended safely. Lubrication conditions can deteriorate. When oil no longer provides the required properties, the risk of wear increases. On a turbocharged engine, the condition of the lubrication system also matters to the turbocharger. This does not mean every unfamiliar sound comes from the turbo: inspection is needed to establish a cause, rather than experimenting with viscosity. Contamination can accumulate. Missed maintenance may contribute to deposits. A new filter and fresh oil do not guarantee that the effects of prolonged neglect have been removed. Where the records show substantial gaps, the workshop should assess the engine and recommend a suitable plan. High mileage by itself is not a reason to add a flushing treatment. A falling level may go unnoticed. A recent replacement date does not guarantee that enough oil remains today. Consumption and leaks can affect the quantity available. Topping up and replacing the oil serve different purposes: one restores the level, while the other renews the oil and filter as a maintenance operation. A top-up does not restart the service interval. Faults become harder to investigate. Without records, it is difficult to compare oil consumption before and after a service or connect the first appearance of a leak with particular work. Keep the list of operations, rather than only a serviced stamp. For someone buying a used Taurus, this history is more informative than general assurances about careful ownership. An oil-pressure light needs immediate attention. If it illuminates with the engine running, stop safely and switch off the engine. Check the level as instructed in the owner's manual. If the warning persists or the level is normal, arrange diagnosis and transport to a workshop. Do not continue the journey while waiting for a routine service appointment. Finding the appropriate Ford Taurus service interval The Oil Change page on me.ford.com publishes general local servicing advice. Treat it as a prompt to check the vehicle's plan, rather than a replacement for the service booklet. This matters particularly across different generations and for the newer hybrid: a general public information page does not provide their complete individual maintenance requirements. Confirm the vehicle documentation, relevant operating conditions, verified last service and any maintenance-system messages where the feature is fitted. If a dealer proposes a different interval, ask which engine, model year and usage pattern it applies to. A written due date and mileage on the invoice are more useful than an unsupported assurance that the car can go longer between visits. Where to find the requirements and how to read oil labels For a Taurus with the relevant SYNC 4 system, Ford explains that the digital owner's manual is accessed through Features and the Owner's Manual button. The route is shown in its central-touchscreen guide. While parked, locate the engine-oil, fluid-capacity and maintenance sections. Check that the information covers your engine; if the relevant section is unavailable, request the documentation from a dealer using the VIN. Both the SAE viscosity grade and the required Ford specification matter when choosing a product. Fully synthetic does not describe every performance characteristic and does not replace the specified requirement. Likewise, two containers displaying the same viscosity may satisfy different standards. Ask the workshop to include the complete oil designation in its quotation so that it can be checked before the work begins. Do not use a refill capacity taken from another Taurus generation. Even matching engine displacement does not prove that the lubrication systems are identical. Confirm the service-fill quantity with a replacement filter, then establish the final level using the prescribed method. The size of a conveniently available container does not determine how much oil the engine should receive. Choose the filter using verified catalogue applicability to the VIN. Ford's filter guidance stresses meeting original-equipment standards. A similar-looking housing, diameter or familiar brand is not a complete compatibility check. The workshop also needs to identify the necessary seals and install everything correctly, so that the service does not introduce a new leak. Using the reminder alongside your actual journeys Where the vehicle is equipped with Intelligent Oil-Life Monitor, the system estimates oil life using operating data. Ford describes the approach in its explanation of the monitoring system. The remaining-life percentage is not a dipstick-level reading. A healthy-looking percentage therefore does not replace a quantity check, and an absent warning does not verify the previous owner's servicing history. Reset the counter after the oil change has been completed, following the instructions for your version. If it shows full life just after purchase, establish which invoice confirms the work. Do not calculate the next service from that display alone. Keep the date, odometer reading and next deadline in a personal log, so that the information survives settings changes or electrical work. Before a longer trip, compare the distance remaining before service with the planned route. If maintenance will become due during the journey, arranging a workshop beforehand can be more convenient. That is a planning decision rather than a new factory interval. Where several people drive the car, agree who checks the level and records top-ups so that everyone does not assume somebody else has done it. What to do about level changes and other symptoms The table below helps identify the next action, but does not diagnose a fault. An oil change, leak repair and pressure investigation may be needed independently. When contacting a workshop, describe observations and their sequence: what appeared first, how the level changed and how far the vehicle travelled after its last service. These details are more useful than naming a suspected component without testing it. Checking the level and completing the service checklist Measure on level ground under the conditions specified in the owner's manual. For an engine with a dipstick, use a clean cloth, seat the dipstick fully before the second reading and follow the same sequence each time. Confirm the waiting period after shutdown for your version. A casual reading immediately after driving should not be compared with one obtained using a different procedure. Do not fill above the maximum mark or open the oil filler while the engine is running. On a hybrid, fully switch off the powertrain before checking: silence from the petrol engine does not by itself mean the vehicle is switched off. Clean up spills and keep the filler and dipstick areas free of dirt, particularly after driving on a dusty road. ☐ Confirm the model year, engine and applicable service schedule using the VIN. ☐ Check the full oil designation, required specification and service-fill quantity. ☐ Verify the filter part number and any replacement seals required for the work. ☐ Make sure the quotation includes an oil change together with a new filter. ☐ Obtain confirmation of the correct level and a check for leaks after servicing. ☐ Save the date, mileage and consumable details, then set the next service due point. After the appointment, watch for new marks where the car is parked and changes in the level. Report a developing problem promptly. Do not settle into repeated topping-up without understanding the cause. A record of quantities and distances between additions helps the workshop assess the situation more precisely than a general comment that the engine occasionally uses oil. Four Taurus servicing mistakes to avoid Transferring recommendations between generations. Search results contain manuals for different Taurus vehicles. Before using their figures, verify the engine, model year and original market. A matching name does not establish that a table applies to your car. Choosing oil only by viscosity. Compare the Ford specification with the product's stated performance. Descriptions such as for turbocharged engines or suitable for hot climates do not replace checking the requirements of the individual engine. Judging the interval solely by colour. Darkening alone does not establish remaining life. Unusual contamination or level changes deserve investigation, but apparently clear oil is not permission to extend the maintenance schedule. Treating a reset counter as proof of replacement. Retain evidence of the work performed. A reminder helps planning only when used correctly: resetting it does not renew the oil or repair an engine fault. Conclusion Start Ford Taurus oil servicing by identifying the version and its requirements, then relate the plan to actual journeys. Replace the filter with the oil, check the level between appointments and keep a clear maintenance history. When choosing a car, compare current offers alongside documented service records: those records help you assess the maintenance costs ahead.

  • ‌
    شراء

    Ford Taurus NASCAR, 2000

    Auction: Nashville 2026 Auction date: September 26, 2026 Lot No.: V469 • Engine: V-8 • Transmission: Manual • Exterior: Blue/White/Red • Interior: Black • Roush Racing Chassis no. RR28-RK050 • Driven to victory by Jeff Burton in the 2000 CarsDirect.com 400 at the Las Vegas Motor Speedway • Burton also made history by leading all 300 laps and winning the Dura Lube 300 at New Hampshire International Speedway on September 17, 2000 • Burton also drove this Ford Taurus to first place in the 2001 Coca-Cola 600 at Charlotte Motor Speedway • Roush Racing 358 CI Ford V-8 engine • 4-speed manual transmission • Blue, White and Red no. 99 Citgo livery • ButlerBuilt Professional Seat Systems racing seat • Simpson racing harness • AutoMeter Pro-Comp Ultra-Lite gauges • Pro-Comp Ultra-Lite Memory tachometer • Roll cage • 4-wheel Brembo disc brakes with slotted rotors • 15-inch Black race wheels • Goodyear Eagle radial race tires • MSD 6T ignition • FIre Bottle fire suppression system This car, Roush Racing Chassis No. RR28-RK050, made history. Jeff Burton led all 300 laps to win the Dura Lube 300 at New Hampshire International Speedway in this car on September 17, 2000. He also won the CarsDirect.com 400 in it at the Las Vegas Motor Speedway that season and hammered this car home to victory lane at the season’s longest race the following year—the 2001 Coca-Cola 600 at Charlotte Motor Speedway. This car is powered by a Roush Racing 358 CI Ford V-8 engine with dry sump plumbing, a dual-feed Holley carburetor and MSD 6T ignition. The engine is mated to a 4-speed manual transmission, and the Taurus body hosts Citgo livery—including the Bassmaster Tournament Trail sponsorship emblem—in blue, white and red. Inside is the roll cage, ButlerBuilt Professional Seat Systems racing seat with Simpson racing harness, AutoMeter Pro-Comp Ultra-Lite gauges and Ultra-Lite Memory tachometer, Roush toggle panel, fire suppression system, and custom shifter knob. Slowed by 4-wheel Brembo disc brakes with slotted rotors, this Ford still rides on 15-inch steel race wheels in black and lightly scuffed yellow-letter Goodyear Eagle radial race tires. First from start to finish or in for the long run, this car did it all. https://www.mecum.com/lots/1173903/2000-ford-taurus-nascar

عرض الكل 62

أسئلة وأجوبة حول Ford Taurus (FAQs)