قطع غيار المحرك3,659 عرض لـ BMW في الإمارات العربية المتحدة, دبي

COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using proprietary Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into

COBB High Flow Filters are designed to permit very high flow rates, minimize restriction, maximize filtration and provide a long life filter. Using proprietary Woven cotton and metal mesh with a precision molded rubber base, the COBB High Flow Filter ensures that only clean air passes into

This panel air filter will increase airflow through the intake system by reducing the restriction of the air filter element. By doing this you allow for a more dense air charge which in turn leads to more fuel being injected and results in more horsepower. This is an easy way to free up a

Performance Increase : 12-15hp, 14-18ft-lb The B58 Eventuri intake system is another example of our “Complete System” principal. It demonstrates the perfect balance between allowing for unrestricted airflow with our open filter housing whilst maintaining low IAT by cold air saturation with

EVENTURI EVE-F8XM-PF Panel Air Filter (Pair) for BMW M3 (F80) / M4 (F82) The EVENTURI EVE-F8XM-PF panel air filters are designed to enhance airflow within the factory intake system of the BMW M3 (F80) and M4 (F82). By reducing intake restriction, these filters improve the density of the ai

The Eventuri E9X M3 airbox lid is a direct replacement for the original plastic version. Made of carbon fiber, it increases the volume of the intake compared to the OEM cover. Available in black carbon and color Kevlar. It does not require fitting in place.

100% Prepreg carbon fibre with a CNC machined collar - the air scoop forces ambient air directly into the filter opening. This scoop simply clicks into place in the front right hand brake duct and effectively saturates the mouth of the intake with cold air. It has been designed to take up

Performance Gain: 8-12hp, 8-10ft-lb The BMW E39 M5 Eventuri intake is designed to offer a complete solution as an upgrade to the stock airbox system. Our aim was to develop an intake system for the S62 engine which worked with the stock ECU map and MAF sensors and produced a genuine improv

The F12/F13/F06 M6 intake system was developed through extensive dyno testing, maximum velocity tests and flow optimisation. We have developed a complete system from front air scoops to filter housings and even inlet tubes to the turbos. The resulting system is very efficient and reduces t

This panel air filter will increase airflow through the intake system by reducing the restriction of the air filter element. By doing this you allow for a more dense air charge which in turn leads to more fuel being injected and results in more horsepower. This is an easy way to free up a

Performance increase = 10-15hp, 8-12ft-lb The E46 M3 intake system is a result of extensive data logging, dyno testing and design optimisation. Our aim was to develop an intake system for the S54 engine which worked with the stock ECU map and MAF sensor and produced a genuine improvement i

Faster recovery of Intake Air Temperatures (IATs) ~30°F reduction of Intake Air Temperatures (IATs) compared to OEM Less pressure drop compared to OEM core Puts less stress on the turbo system and allows more boost to be made at higher target power levels Ultra strong CNC Billet constructi

Faster recovery of Intake Air Temperatures (IATs) ~30°F reduction of Intake Air Temperatures (IATs) compared to OEM Less pressure drop compared to OEM core Puts less stress on the turbo system and allows more boost to be made at higher target power levels Ultra strong CNC Billet constructi

Faster recovery of Intake Air Temperatures (IATs) ~30°F reduction of Intake Air Temperatures (IATs) compared to OEM Less pressure drop compared to OEM core Puts less stress on the turbo system and allows more boost to be made at higher target power levels Ultra strong CNC Billet constructi

With over 1500 hours of design, development, machining, and testing, CSF, along with partners VF Engineering (USA) and Custom Plenum Creations (Australia), has now brought a state-of-the-art CNC machined, high-performance Charge-Air Cooler Manifold to the B58 platform (Mk5 Supra and BMW mo

The F90 M5 Eventuri intake system was developed through extensive real world testing and airflow simulation analysis. Now in the updated V2 design, it features sealed filter housings to maintain a more steady IAT, even while stationary. The new shrouds which seal the housings, coupled with

EVENTURI EVE-M2C-CF-INT Intake System (Carbon) for BMW M2 Competition (F87) The EVENTURI EVE-M2C-CF-INT carbon intake system for the BMW M2 Competition (F87) is designed to optimize airflow to the twin-turbocharged engine, resulting in significant gains in performance and throttle response

Performance Gain: 10-15hp, 8-12ft-lb The Z4M intake follows on from our E46 M3 system as a result of extensive data logging, dyno testing and design optimisation. Our aim was to develop an intake system for the S54 engine which worked with the stock ECU map and MAF sensor and produced a ge

The F10 M5 intake system was developed through extensive dyno testing, maximum velocity tests and flow optimisation. We have developed a complete system from front air ducts to filter housings and even inlet tubes to the turbos. The resulting system is very efficient and reduces the resist

These Carbon shrouds are a recent addition to this intake system. They seal the openings in front of the filter housings from the engine bay whilst still allowing for the air flow to enter the filters from the front scoops. The shrouds follow the design curves of the housings and extend to

BMW M2 / M235I / M135I Our updated F22 N55/M2 Eventuri intake system is a perfect example of our “Complete System” principal. It demonstrates the perfect balance between allowing for unrestricted airflow to our Venturi housing and cold air saturation with our scoop and new sealed duct comb

For BMW G20 B48 cars built BEFORE November 2018 where a pipe with MAP sensor is used This product is not compatible for 2023+ models.

EVENTURI EVE-F8XMV2-CF-INT Intake System Ver2 (Carbon) for BMW M3 (F80) / M4 (F82) The EVENTURI EVE-F8XMV2-CF-INT Version 2 carbon intake system for BMW M3 (F80) and M4 (F82) is a comprehensive solution engineered to deliver maximum performance and consistent intake air temperatures (IAT).

For BMW G20 B48 cars built AFTER November 2018 where a pipe with a temperature sensor is used This product is not compatible for 2023+ models.