Be the first to know about new ads
Save your ad search filters, and find the ads you need faster.
1 - 1 ad
out of 1
Mercedes-Benz E-Class price starts from AED 15,500 and goes up to AED 850,000. Final on-road price may vary slightly based on insurance, registration, and optional accessories.
Mercedes-Benz E-Class Sedan
Best place to buy
Mercedes-Benz E-Class Coupe-Hardtop
Best place to buy
Mercedes-Benz E-Class Wagon 5 doors
Best place to buy
Mercedes-Benz E-Class Cabriolet
Best place to buy
Mercedes-Benz E-Class Automatic
Best place to buy
Mercedes-Benz E-Class Petrol
Best place to buy
Mercedes-Benz E-Class Hybrid
Best place to buy
Mercedes-Benz E-Class Diesel
Best place to buy
Mercedes-Benz E-Class 2026
Best place to buy
Mercedes-Benz E-Class 2025
Best place to buy
Mercedes-Benz E-Class 2024
Best place to buy
Mercedes-Benz E-Class 2023
Best place to buy
Mercedes-Benz E-Class 2022
Best place to buy
Mercedes-Benz E-Class 2021
Best place to buy
Mercedes-Benz E-Class 2020
Best place to buy
Mercedes-Benz E-Class 2019
Best place to buy
Mercedes-Benz E-Class 2018
Best place to buy
Mercedes-Benz E-Class 2017
Best place to buy
Mercedes-Benz E-Class 2016
Best place to buy
Mercedes-Benz E-Class 2015
Best place to buy
Mercedes-Benz E-Class 2014
Best place to buy
Mercedes-Benz E-Class 2013
Best place to buy
Mercedes-Benz E-Class 2012
Best place to buy
Mercedes-Benz E-Class 2011
Best place to buy
Mercedes-Benz E-Class 2010
Best place to buy
Mercedes-Benz E-Class 2009
Best place to buy
Mercedes-Benz E-Class 2008
Best place to buy
Mercedes-Benz E-Class 2007
Best place to buy
Mercedes-Benz E-Class 2006
Best place to buy
Mercedes-Benz E-Class 2005
Best place to buy
Mercedes-Benz E-Class 2004
Best place to buy
Mercedes-Benz E-Class 2003
Best place to buy
Mercedes-Benz E-Class 2002
Best place to buy
Mercedes-Benz E-Class 2000
Best place to buy
Mercedes-Benz E-Class 1997
Best place to buy
Mercedes-Benz E-Class 1994
Best place to buy
Mercedes-Benz E-Class 1993
Best place to buy
Mercedes-Benz E-Class 1992
Best place to buy
Mercedes-Benz E-Class Dubai
Best place to buy
Mercedes-Benz E-Class Sharjah
Best place to buy
Mercedes-Benz E-Class Riyadh
Best place to buy
Mercedes-Benz E-Class Ajman
Best place to buy
Mercedes-Benz E-Class Abu Dhabi
Best place to buy
Mercedes-Benz E-Class Umm Al Quwain
Best place to buy
Mercedes-Benz E-Class Muscat
Best place to buy
Mercedes-Benz E-Class Al Buraymī
Best place to buy
Mercedes-Benz E-Class Barkā’
Best place to buy
Mercedes-Benz E-Class Sohar
Best place to buy
Mercedes-Benz E-Class Jeddah
Best place to buy
Mercedes-Benz E-Class Dammam
Best place to buy
Mercedes-Benz E-Class Khobar
Best place to buy
The chart shows the dynamics of the model's average price on the used market over the past year. This data helps you assess whether the purchase is attractive and forecast the car's future value.
Prices on AUTO.AE may differ from the actual selling price. Data is based on our database of sold vehicles and current listings. For an accurate estimate, use our tool.
Mercedes-Benz E-Class brake pads and rotors do not have one replacement mileage that suits every car. Service life changes with the generation, fitted brake package, vehicle weight and powertrain, route profile, braking style, temperature, and caliper condition. Mileage is a reason to inspect; measured wear and physical condition determine replacement. Diagnosis should cover the inner and outer pads, both faces of each rotor, wear sensors, pistons, slides, hubs, and the vehicle's behaviour under braking. Replacing only the most obvious worn component without finding the cause can leave taper wear, overheating, or runout and allow the complaint to return. In brief. Replace pads and rotors when usable material or geometry reaches the limit for the exact component, or when cracking, deep corrosion, overheating, contamination, or a mechanical fault makes continued use unsafe. A wear message matters, but it does not describe every wheel or both faces of every rotor. Identify the E-Class Version First The E-Class name spans several generations and body styles, standard and performance variants, rear- and all-wheel drive, and mild- or plug-in hybrid powertrains. W212, W213, and W214 brake dimensions, calipers, sensors, and repair limits are not interchangeable. Even within one generation, the engine, wheel package, and factory options can change the fitted hardware. Before ordering components, record the VIN, full model designation, chassis code, build date, engine, drivetrain, and wheel size. Then compare those details with the markings and construction of the installed assembly. The official E-Class page presents the current model line, but it cannot identify the brake package on an individual car. W214. Confirm the powertrain, drivetrain, wheel size, and any factory performance package. W213 and earlier generations. Use their own dimensional limits and service procedure. Mercedes-AMG and sport variants. Do not transfer rotor or pad dimensions from a standard version without a VIN check. Modified car. Match components to the calipers, rotors, and wheels that are actually installed. How Regeneration Affects a Hybrid E-Class In a plug-in hybrid, the electric drive can provide part of routine deceleration. Pad thickness may reduce more slowly, but the friction brakes also have fewer opportunities to clear moisture and light corrosion from the rotors. Inspect the complete swept area on the inboard and outboard faces; generous lining thickness alone does not prove that the brake assembly is healthy. When the Components Actually Need Replacement The manual for the individual vehicle helps interpret system messages, but it does not replace repair data for the installed brake assembly. Check minimum rotor thickness, permitted runout, and lining limits against the VIN and exact part. One value must not be transferred between E-Class generations or specifications. Usable friction material is close to the specified limit, damaged, or covered by a vehicle wear warning. Rotor thickness, thickness variation, or axial runout is outside specification after correct measurement. A swept face has cracking, deep grooves, substantial corrosion, heavy heat marking, chips, or contamination. Uneven wear accompanies a fault in the caliper, slides, hardware, or hub and the component cannot be retained safely. A wear sensor does not monitor every lining or measure a rotor. Depending on specification, it reports only the designed monitoring point. An inner pad in another caliper, an inboard rotor face, or a restricted slide can deteriorate without a separate warning. Key rule. Replace pads as a complete axle set. Assess and service rotors in axle pairs so the left and right sides retain comparable friction conditions. Correct the cause of taper wear, overheating, or runout before new components are fitted. What to Check After Removing the Wheels A view through the spokes is not enough because it reveals only part of the outboard side. With the wheels removed, record measurements for each corner, compare the inner pad with the outer pad, and compare the left side of an axle with the right. Differences Between Pads Matter More Than an Average A much thinner inner pad can point to piston operation or restricted return, while accelerated outer-pad wear can indicate slide or fit problems. Tapered material requires a free-movement check. Delamination, cracking, backing-plate damage, and brake-fluid contamination are judged separately from thickness. A Rotor Needs More Than a Visual Check An outer lip is not a measurement, and a clean outboard face does not confirm the inboard surface. Resurfacing can be considered only after checking starting thickness and the permitted finished dimension. Cracks, deep corrosion, heavy heat marking, or an out-of-limit size will normally require replacement of the axle pair. How to Investigate Noise and Vibration Before dismantling, record the conditions in which the symptom appears: with cold or warm brakes, after washing or parking, under light deceleration, or during heavy use. For vibration, note whether it is strongest through the steering wheel, pedal, or body. This directs the diagnosis but does not replace inspection. Why a New Rotor May Not Cure Pulsation Repeat vibration can result from transferred pad material, thickness variation, corrosion between rotor and hub, bearing play, or uneven wheel-fastener torque. A new rotor mounted against a contaminated face can develop runout again. Confirm the cause with a micrometer and dial indicator rather than pedal feel alone. Conditions That Accelerate E-Class Brake Wear frequent hard braking, sustained speed, and operation with a heavy load; urban routes with repeated stops and extended dense traffic; long descents with continuous pedal pressure; high ambient heat, dust, and sand around boots and slides; extended parking after washing or moisture reaches the swept surfaces; tight pad movement, a binding piston, damaged boot, or unsuitable lubricant; aftermarket wheels and modifications that change mass, cooling, or brake load. Hot weather does not create a separate replacement interval, but it reduces cooling margin during demanding use. After overheating, inspect pads, rotors, boots, hoses, brake fluid, and free wheel rotation. Fresh friction material cannot correct a binding caliper. Rear-Brake Work Requires the Correct Service Mode Do not force an electronic parking-brake actuator back with ordinary tools without the prescribed procedure. The sequence for moving it into the installation position depends on the version. After assembly, check instrument messages, parking-brake operation, pedal feel, and the required basic system functions. Diagnosis and Service Checklist This sequence moves from vehicle identification to measurement, correction of the cause, and safe final verification. It suits scheduled service and the assessment of a used E-Class. ☐ Record the VIN, model designation, chassis code, powertrain, drivetrain, and wheel size. ☐ Define the complaint and the conditions that produce noise, vibration, pull, or heat. ☐ Read brake-system messages and retain diagnostic information before dismantling. ☐ Remove the wheels and measure the inner and outer pads in every caliper. ☐ Measure rotor thickness at several points and compare it with the exact part limit. ☐ Check thickness variation, runout, hub cleanliness, and bearing play. ☐ Inspect pistons, boots, slides, hardware, hoses, and parking-brake mechanism. ☐ Select pads, rotors, sensors, and single-use hardware by VIN and installed assembly. ☐ Assemble to the correct procedure and tighten the wheels evenly. ☐ Complete the required bedding process and verify pedal, warnings, and braking. Mistakes to Avoid selecting parts from the E-Class name or wheel size alone; replacing one pad or repairing only one side of an axle; judging a rotor without measurement and an inboard inspection; installing new components before correcting hub corrosion or restricted caliper movement; clearing warnings before repair and final verification are complete; conducting a road test with leakage, an unsafe pedal, or an overheated wheel. Important. Metallic grinding, strong pull, one overheated wheel, leakage, a brake-system warning, or a clear loss of performance calls for a safe stop and diagnosis. Do not drive normally or begin a road test until safe pedal feel and correct system operation have been restored. Conclusion Mercedes-Benz E-Class brake pads and rotors should be replaced according to measured condition and the limits for the exact component, not one universal mileage. Confirm the VIN and brake package, compare every pad, measure both rotor faces, inspect calipers and hubs, and correct the cause of uneven wear. When considering a used E-Class, current listings help compare generations and specifications, but photographs and stated mileage do not prove brake condition. Review service history, inspect the car on a lift, use measuring tools, and complete a safe road test after the initial diagnosis.
Mercedes-Benz E-Class differential oil has no single replacement interval: the installed final drive and applicable service requirements determine the schedule. Rear-wheel-drive cars have a rear unit; 4MATIC adds a front differential. UAE heat and demanding use warrant attention, but do not establish a factory interval. Identify the specification and service history before booking the work. Which Signs Suggest the Differential Oil Needs Checking? The differential lets the driven wheels turn at different speeds through a corner, while the final drive transmits torque to them. Oil protects the gear contacts and bearings. Loss or contamination may remain unnoticed from the driving seat. An absence of dashboard warnings therefore does not establish that the level is correct; the housing and seals need an underbody inspection. The following changes justify a workshop visit. None establishes, on its own, that replacing the lubricant will be sufficient to resolve the problem. • Wet traces around flanges, housing joints or plugs. Establish where they originate: fluid from above can make the differential appear to be leaking. Clean the area, trace any fresh seepage and assess the oil level. • Whining during acceleration or when lifting off the accelerator. Record the speed and circumstances. A response to changing load helps the investigation, but does not yet distinguish gear damage from other driveline faults. • Unusual material in drained oil. Large metal particles, substantial contamination or evidence of water need an explanation. Dark colour alone cannot reliably establish remaining lubricant life or the extent of internal wear. • Noise or leakage immediately after servicing. Check the product, filling procedure and work performed. Waiting for a new sound to disappear over several journeys can delay discovery of an incorrect level or damaged seal. Rear-Wheel Drive, 4MATIC and AMG Differences A rear-wheel-drive E-Class has no driven front differential. On an all-wheel-drive car, the front and rear final drives are separate service items. The automatic transmission and the arrangement distributing torque between the axles also have their own requirements. An invoice saying only transmission oil changed does not identify which assemblies were actually serviced. For W212, W213 and W214 saloons, establish the generation and then the specification using the VIN, or vehicle identification number. The engine, drive layout and identification on the fitted final drive refine the selection. If an assembly has been replaced, obtain its part number and repair paperwork: the original build specification may no longer describe the hardware in the car. Important. AMG Line identifies an equipment and styling package, not a confirmed Mercedes-AMG differential type. An AMG model needs its locking-differential specification checked separately. Hybrid propulsion is likewise no reason to transfer a lubricant requirement from another Mercedes-Benz model. What Problems Can Old or Unsuitable Oil Cause? Aged fluid, insufficient oil and the wrong formulation present different risks. Deterioration does not always produce an obvious noise, while a leak can make even a recently serviced assembly unsafe to operate. Decisions therefore depend on service history, inspection and checks, rather than just the distance covered since the previous change. Fresh lubricant restores proper lubrication conditions only when the assembly is sound and retains its oil. It cannot reverse worn tooth surfaces, bearing damage or incorrect adjustment. If obvious shavings appear during draining, request photographs and diagnostic findings before authorising replacement of the complete assembly. Allowing for Heat and Demanding Use Describe the actual workload to the workshop: frequent fully laden journeys, sustained motorway driving or repeated hard acceleration. This information helps assess stress and the need for extra inspections. Operating in a hot climate alone does not justify assigning the same arbitrary kilometre interval to every differential. Engine idling with the air conditioning running is not equivalent to driving for the differential. Its gearing does not rotate while the wheels remain stationary, so engine hours and engine-oil recommendations cannot be converted directly into a final-drive service interval. External dust does not prove that contamination has entered an intact housing either. Exposure to deep water warrants attention regardless of the next scheduled service date. Assess possible moisture ingress and seal condition. If a workshop proposes more frequent preventive changes because of the way the car is used, have it identify this as an individual recommendation and record its reasoning together with the next due point. Which Service Schedule and Oil Specification Apply? The Mercedes-Benz UAE service programme lists rear-axle oil replacement for selected models, subject to manufacturer requirements. Its general booklet timings therefore cannot be assigned to every E-Class. Confirm the applicable operations using the VIN, vehicle age, mileage and current local service requirements. A Service A or Service B reminder indicates that maintenance is approaching; it does not replace a breakdown of additional work. Ask the workshop to confirm separately whether each differential is due for replacement oil. With an unknown history, establish the condition and specification before agreeing the work. A missing change record proves neither that the oil is serviceable nor that immediate replacement is compulsory. The official Mercedes-Benz Sheet 231.1 separates lubricant requirements by assembly design. These examples concern standard E-Class differentials. Every condition in the relevant row must match; final selection still requires confirmation against the fitted hardware and its service data. An approval number identifies manufacturer requirements, not a quality ranking. A higher number does not establish compatibility with all earlier assemblies. SAE viscosity is not a complete selection method either: two oils with the same viscosity marking may serve different applications. Summer heat alone is no reason to choose a thicker lubricant. Oil-Selection Errors to Avoid • Buying on the strength of the word hypoid or the E-Class name without checking the required approval. • Treating recommended for wording as equivalent to confirmed MB-Approval. • Putting the same product in both differentials solely because they belong to the same car. • Adding a friction modifier for a locking differential without a requirement for the installed unit. Once the required approval is known, match the precise product name against the current approved-oil list. If the specified material is unavailable, agree any alternative using manufacturer documentation. General sales advice and successful use in another E-Class do not demonstrate compatibility with this assembly. Note. The drained quantity does not define the correct refill quantity: the level may already have been low. A service fill can also differ from a dry assembly’s capacity. Set the level using that differential’s procedure, including the required vehicle position and checking conditions. Checklist for Booking and Collecting the Car ☐ Confirm the VIN, generation, drive layout and any previously replaced assemblies. ☐ Name each differential on the work order and agree its required oil approval. ☐ Check access to the plugs and obtain the specified seals before draining. ☐ Agree an inspection of the housing, seals and ventilation if leakage is found. ☐ Record unusual contamination or metal particles in the drained lubricant. ☐ Obtain a record of the date, mileage, product used and leak-check result. Oil quantity, level-setting steps and tightening torques come from the repair procedure for the identified assembly. A universal instruction to fill to the opening, without consulting that procedure, is unsuitable for the whole range. When several assemblies are serviced together, the paperwork should list their materials and operations separately. Why Does an E-Class Hum or Whine, and Can an Oil Change Help? Poor lubrication can contribute to gear and bearing wear, and damaged working surfaces can then produce a whine. A noise from the rear, however, does not automatically identify the differential as the source. Tyre, wheel-bearing and propeller-shaft sounds travel through the body, so their apparent position in the cabin may be misleading. Before the visit, note whether the sound depends on road speed, warm-up, surface or accelerator position. A hum that changes with the tarmac warrants attention to the tyres. Noise responding to changes in drive load gives the workshop a reason to investigate loaded driveline components. These observations guide diagnosis; they do not replace inspection and testing by a technician. For a 4MATIC car with symptoms after a wheel change, also check the approved tyre combination, pressures and tread condition. Different front and rear sizes can be part of the vehicle specification, so insisting on four identical sizes is not universally correct either. Avoid trying to solve noise or vibration through lubricant choice before checking the wheels. When reviewing current listings for a used E-Class, ask early about final-drive repairs and previous leaks. Compare the records with the fitted assemblies during inspection. An oil change just before sale is useful history, but does not establish that the internal components are free from wear. After servicing, compare the car’s behaviour under the original conditions. A persistent whine calls for further diagnosis, not a sequence of different oils. Stop driving if pronounced grinding, impacts or substantial leakage develop, and arrange transport to a workshop in accordance with the vehicle’s recovery requirements. Conclusion Identify the E-Class differential specification before confirming its approval and service interval. Repair leaks, retain lubricant records and investigate noise at its source. Correct maintenance protects a sound assembly; it cannot restore already damaged gears or bearings.
Change E-Class 4MATIC transfer case oil according to the service requirements for its specific transmission. If leakage or contamination is found, establish the cause first. There is no single interval for every generation. A rear-wheel-drive version has no all-wheel-drive transfer case and does not require this operation. Before booking, confirm the VIN, vehicle series and transmission code. These details establish whether separate transfer case work is required and which fluid is suitable. Key point. Fluid approval, replacement timing and the service method are separate checks. An appropriate lubricant does not automatically need replacing at every service, nor is it suitable for every 4MATIC assembly. Identify the Transmission in Your E-Class The E-Class name covers several vehicle series and body styles. W212, W213 and W214 identify saloon generations, but do not replace the complete assembly code. For an estate, coupe, cabriolet or imported car, verify its own series and factory specification. Rear-wheel drive. The maintenance plan covers the automatic transmission and rear differential; it should not include a separate 4MATIC transfer case that is not fitted. 4MATIC. Use the vehicle data to identify the unit delivering torque to the front axle, its lubrication arrangement and the specified procedure. AMG, 4MATIC+ and hybrid. The all-wheel-drive designation alone is insufficient: use information for the installed powertrain and transmission. What to Confirm Before Authorising Work Ask the workshop to name the assembly on the job order and explain whether its oil is changed separately or as part of a transmission procedure. “All-wheel-drive service” does not identify whether work includes the front differential, rear differential and transfer unit. Each may require a different operation and fluid. When the Transfer Case Needs an Earlier Check Judder or humming calls for diagnosis rather than an immediate conclusion. Note whether it occurs when cold, after warming up, under acceleration or during a slow turn. Mention recent tyre changes and transmission work as well. Fresh oil residue. Trace the source: fluid on an underbody panel may have run down from another assembly. Judder after a wheel change. Check the approved tyre combinations, pressures and wear before investigating the transmission. Driving through deep water. Arrange an inspection for damage and possible lubricant contamination, even without a dashboard warning. Vibration or a new noise. Keep the diagnosis broad: drive components, mountings and bearings can cause similar symptoms. Important. Stop driving and arrange an assessment if there are severe driveline impacts, substantial fluid loss or difficulty moving. An oil change cannot repair mechanical damage. Which Mercedes-Benz Requirements Can Be Confirmed Mercedes-Benz sheet 231.1 lists transfer case fluid applications on page 12. The following confirmed examples relate to the E-Class. This table does not cover every E-Class variant. Establish requirements for series 212 and any unlisted configuration from its assembly data. Two approvals in one row are not permission to mix products. How to Establish the Replacement Schedule Find the precise operation in the VIN-specific service sheet: inspection, level check or replacement. Where mileage and time limits are specified, account for both. An approval number from the table above does not establish an interval, and a service reminder does not replace the list of additional operations. If maintenance history is missing, ask for an assessment of condition and leakage before agreeing on the applicable procedure. A generic online recommendation does not establish the factory interval for your transmission. For use in the UAE and Gulf region, describe sustained loads in hot weather, urban driving and any water exposure. A decision to service earlier should follow the operating conditions and inspection findings; it should not be presented as a universal Mercedes-Benz requirement. How to Select the Fluid and Confirm the Quantity Confirm the required approval sheet for the specific assembly before checking the full product name. Colour, viscosity and an ATF label alone do not establish suitability. Automatic transmission fluid is not automatically suitable for the transfer case simply because the assemblies are connected. Confirm the service fill quantity for the operation: it may differ from the capacity of a completely dry assembly. Check the level-setting procedure and temperature where specified. The amount drained is not a reliable substitute for the correct level check. Agree on replacement seals and tightening requirements. Do not add additives or flushing to the procedure without an established reason. How to Review the Diagnosis and Completed Work Owner’s Checklist ☐ Record the VIN, vehicle series and complete transmission code. ☐ Confirm the drive layout and assembly to be serviced. ☐ Obtain the reason for replacement and applicable service sheet. ☐ Verify the fluid approval and complete product name. ☐ Confirm the quantity, level-setting procedure and sealing parts. ☐ Report symptoms, tyre changes and any water exposure. ☐ Keep a record of the date, mileage and work completed. ☐ Check for leakage and review the follow-up road test. ☐ Record when the next inspection or service is due. Servicing Mistakes Applying one interval to every E-Class. Vehicle series and transmission code determine which service data apply. Confusing the transfer case with the differentials. The general term “gear oil” does not make fluids interchangeable. Mixing products by colour or an approval list. Appearance does not establish compatibility. Treating judder with an oil change before checking its cause. This can leave the underlying fault unresolved. Conclusion For the E-Class, first confirm that a transfer unit is fitted and identify its configuration. Establish its fluid, timing and procedure from the individual vehicle’s data. If noise, leakage or judder prompted the visit, ask for the diagnosis and the results of the checks after servicing. When comparing current offers for the Mercedes-Benz E-Class, examine all-wheel-drive maintenance records: a general service entry does not prove that every transmission operation was completed.
Listings for Mercedes-Benz E-Class may include these trims: E 200, E 200 4MATIC, E 450 4MATIC Sport, and E 300 Luxury, among others. The current selection depends on the selected country, model year, and vehicle availability. Use the “Trim” filter to compare the available options.
Mileage should be assessed together with the vehicle’s age, condition, and service history. Compare the mileage with similar vehicles of the same model year, and check the service history and actual condition of the vehicle before buying.
Current Mercedes-Benz E-Class listings on AUTO.AE are priced from 15,500 to 850,000 AED. The price depends on the model year, mileage, trim, condition, and regional specifications. These figures are based on active listings and may change.
A private seller may offer a lower price, while a showroom may provide additional services, such as financing, a warranty, or help with insurance. Terms vary, so check the information in the listing, the vehicle documents, and the seller’s details.
Check the vehicle registration card (Mulkiya), the VIN on the vehicle and in the documents, the owner’s details, the service history, and accident records. Also check for any outstanding loan, fines, or other restrictions. It is advisable to arrange an independent inspection before completing the purchase.
Yes. You can arrange an independent technical inspection with the seller at a service centre of your choice. The inspection can help assess the condition of the engine, transmission, bodywork, electronics, and other components.
GCC Specs means that the vehicle was manufactured to specifications for Gulf Cooperation Council markets. These versions are generally designed for local climate conditions. However, GCC Specs alone does not confirm the vehicle’s condition or mean that it has a valid warranty; these points should be checked separately.
Some showrooms offer financing. If available, the terms or an estimated monthly payment may be shown in the listing. The final interest rate and approval depend on the bank, the down payment, and the buyer’s details.
