Be the first to know about new ads
Save your ad search filters, and find the ads you need faster.
1 - 2 ads
out of 2
Toyota RAV4 price starts from AED 5,700 and goes up to AED 215,000. Final on-road price may vary slightly based on insurance, registration, and optional accessories.
Toyota RAV4 SUV 3 dr.
Toyota RAV4 SUV 5 dr.
Best place to buy
Toyota RAV4 SUV 3 dr.
Best place to buy
-Toyota RAV4 Automatic
Best place to buy
Toyota RAV4 Continuously Variable Transmission (CVT)
Best place to buy
Toyota RAV4 Manual
Best place to buy
Toyota RAV4 Petrol
Best place to buy
Toyota RAV4 Hybrid
Best place to buy
Toyota RAV4 2001
Toyota RAV4 2026
Best place to buy
Toyota RAV4 2025
Best place to buy
Toyota RAV4 2024
Best place to buy
Toyota RAV4 2023
Best place to buy
Toyota RAV4 2022
Best place to buy
Toyota RAV4 2021
Best place to buy
Toyota RAV4 2020
Best place to buy
Toyota RAV4 2019
Best place to buy
Toyota RAV4 2018
Best place to buy
Toyota RAV4 2017
Best place to buy
Toyota RAV4 2016
Best place to buy
Toyota RAV4 2015
Best place to buy
Toyota RAV4 2014
Best place to buy
Toyota RAV4 2013
Best place to buy
Toyota RAV4 2012
Best place to buy
Toyota RAV4 2010
Best place to buy
Toyota RAV4 2008
Best place to buy
Toyota RAV4 2001
Best place to buy
-Toyota RAV4 Umm Al Quwain
Toyota RAV4 Barkā’
Best place to buy
Toyota RAV4 Sharjah
Best place to buy
Toyota RAV4 Umm Al Quwain
Best place to buy
-Toyota RAV4 Abu Dhabi
Best place to buy
Toyota RAV4 Ajman
Best place to buy
Toyota RAV4 Al Buraymī
Best place to buy
Toyota RAV4 Dubai
Best place to buy
Toyota RAV4 Dammam
Best place to buy
Toyota RAV4 Sohar
Best place to buy
Toyota RAV4 Muscat
Best place to buy
Toyota RAV4 Riyadh
Best place to buy
Toyota RAV4 ‘Ibrī
Best place to buy
Toyota RAV4 Jeddah
Best place to buy
Toyota RAV4 Medina
Best place to buy
The chart shows the dynamics of the model's average price on the used market over the past year. This data helps you assess whether the purchase is attractive and forecast the car's future value.
Prices on AUTO.AE may differ from the actual selling price. Data is based on our database of sold vehicles and current listings. For an accurate estimate, use our tool.
Equal mileage does not produce equal brake wear on every Toyota RAV4. The number of stops, vehicle load, descents, road dust and regenerative braking on hybrid models all affect component life. The maintenance schedule sets inspection points, while measurements and a complete-system check determine whether repair is needed. Primary rule. Mileage sets an inspection point, not a mandatory replacement date. Use pad and rotor measurements, wheel temperature and free caliper operation to make the decision. When a Toyota RAV4 needs an unscheduled brake inspection Noise, vibration and pulling do not identify one part by themselves. Pads, rotors, a hub, a caliper, a tyre or suspension may produce similar behaviour. Record the speed and load at which the symptom appears, then compare both sides of the axle. A new squeal or grinding sound appears. A brief high note can come from a wear indicator, trapped grit or pad hardware. Metallic grinding calls for an immediate stop to routine use because the backing plate may be contacting the rotor. The pedal or steering wheel vibrates under braking. Repeatable pulsation calls for rotor runout and thickness-variation measurements. The hub mounting face, wheel and suspension should be inspected at the same time. The RAV4 changes direction or one wheel becomes hot. Restricted piston, slide or hose movement can hold a pad against the disc. Compare remaining material, temperature and free wheel rotation on the left and right. The pedal feels softer or stopping distance grows. Pad thickness alone does not explain these changes. Diagnosis must include circuit sealing, brake fluid, booster operation and electronic brake controls. Why delaying RAV4 brake repair increases risk A crossover may face frequent urban stops, carry passengers and luggage, or descend a long mountain road. Each situation changes friction-part temperature and load. Hybrid regeneration reduces conventional-brake use during only some deceleration events. Heat capacity declines. Thin lining provides less insulation for the piston and fluid. Pedal response can change sooner during repeated hard stops, especially when the vehicle is fully loaded. The rotor face is scored. Once usable lining is gone, the pad backing cuts deep grooves into the disc. The repair may then require rotors and fitting hardware as well as pads. Rolling resistance rises. A binding caliper keeps the lining against the disc and heats the wheel without pedal input. Excess temperature ages boots and lubricant and can affect the hub and tyre. Brake-force balance deteriorates. A left-to-right difference is particularly hazardous on wet, sandy or uneven surfaces. Driver-assistance systems cannot remove a mechanical restriction. The work scope expands. Driving through pulling, grinding or continuous heat may damage the rotor, slides and nearby parts. New pads will not last if the original cause remains. Toyota guidance for RAV4 brake checks Toyota owner manuals call for brake-pad inspection when the wear indicator produces a warning sound. Continuing after the lining is exhausted can damage the rotor and impair braking. Use the limits and procedure for the RAV4's exact year, market and powertrain. Important: a scheduled inspection does not mean automatic replacement. The technician compares inner and outer pads, measures the discs and checks caliper travel, boots, hoses and brake-fluid condition. How to select Toyota RAV4 pads and rotors RAV4 covers several generations, petrol and hybrid powertrains, different wheel sizes and multiple driveline layouts. Similar-looking vehicles can use different discs, calipers and parking-brake mechanisms. Begin the parts search with the VIN and catalogued number. Verify each axle separately. Model year and engine size do not define the front and rear kits on their own. Use the VIN to confirm the brake package, shims, springs and fasteners. Consider lining behaviour. A daily-use crossover needs stable friction after heating, consistent pedal response and controlled noise. An unknown compound can shorten rotor life or change braking feel. Match rotor dimensions. Check diameter, overall height, nominal and minimum thickness, ventilation and bolt-hole arrangement. An identical outline does not prove correct fitment. Service the complete axle. Replace left and right pads together. Measure both rotors at equivalent points and use the applicable limits and component maker's instructions to decide on machining or replacement. Identify the rear-brake design. Some RAV4 versions require a specified service procedure for the electric parking brake before caliper disassembly. Confirm the method from the VIN and manual. Current listings for the Toyota RAV4 can help establish its generation, powertrain and production year. Pads, rotors and fitting hardware still require VIN confirmation for the selected vehicle. Why noise or vibration can remain after replacement New parts cannot correct a contaminated hub, restricted slides or incorrectly positioned hardware. Uneven friction-material transfer can also cause pulsation. A return inspection should use measurements and identify the cause instead of simply fitting another consumable set. How operating conditions change RAV4 brake wear One route may combine congestion, motorway sections, dusty access roads and extended descents. There is no universal shortened replacement interval for this mix. New symptoms and a record of each measurement provide better evidence. For a valid comparison, use the same measuring points and inspection conditions. If wear suddenly accelerates, check caliper travel, tyre condition, wheel alignment and the vehicle's usual route. Frequent city stops. The pads complete many heat cycles during a short journey. In this use, compare inner and outer lining more carefully and verify that the slides move freely. Long descents and a full load. Passengers and luggage increase the energy that the brakes must dissipate. Use the transmission mode specified for descents and avoid continuous light pedal pressure. Hybrid operation. During gentle deceleration, the motor returns some energy to the battery and the disc brakes may engage less often. Inspection remains necessary because limited use does not prevent corrosion or contamination. Sand and unpaved roads. Particles reach slides and shims, while dirt can conceal the visible surfaces. After such travel, check for new sounds, free rotation and wheel-temperature differences. Moisture and washing. A light surface film often clears after several controlled brake applications. Persistent noise, deep corrosion or pulsation needs inspection, and hot rotors should not be cooled abruptly with water. Brake diagnosis and service sequence Record the operating conditions. Note speed, load, journey length, steering position and pedal effort when the symptom begins. On a hybrid, identify whether it occurs during regenerative deceleration or firmer braking. Inspect both pads in every caliper. A view through the wheel does not reveal the complete set. If the hidden lining is thinner, investigate the piston, slides and flexible hose. Compare all four wheels. Measure front and rear rotors, inspect the boots and test the parking brake using the procedure for that version. Do not treat an electric actuator as a mechanical unit without consulting the manual. Document the measurements. Record each pad's remaining material, rotor thickness and runout together with the limits used. The figures make the next wear-rate comparison meaningful. Correct the source of uneven operation. Clean the hub, restore piston and slide movement and examine hoses and protective boots before installing parts. Otherwise, the replacement set can develop the same fault. Bed the components in. Follow the pad and rotor maker's procedure. Avoid unnecessary hard stops, allow cooling time and confirm predictable braking in a safe area after the work. Assess a pre-owned RAV4 carefully. Balanced wear, measured rotor thickness, absence of overheating and a documented service history all matter. Also check brake fluid, parking-brake operation and whether the fitted parts match the vehicle specification. Corrosion on one side, blue heat marks or a pronounced lip on the disc call for further diagnosis. A lift, measuring tools and a controlled road test are needed before purchase. Common RAV4 brake-service mistakes Relying on hybrid regeneration. Friction brakes still carry hard stops and events when regeneration is limited. Ordering by model year alone. Market, driveline and wheel differences can change the brake package; verify it by VIN. Installing pads without measuring rotors. New lining cannot correct a disc below limit, excessive runout or deep scoring. Working on one side of an axle. Fit friction parts as an axle set and correct unequal wear. Ignoring pedal changes or warnings. Stop routine driving until hydraulic, booster and electronic checks are complete. Conclusion Use measured condition to decide when Toyota RAV4 pads and rotors need replacement. Noise, pulling, wheel heat, vibration or pedal changes demand diagnosis before routine driving. Records from earlier inspections help reveal accelerated or uneven wear before it becomes severe.
For a Toyota RAV4, the answer depends on the driveline as much as the mileage. A front-wheel-drive model has no separate rear differential or transfer case. A petrol AWD model has a transfer unit and rear differential filled with dedicated gear oil, while a hybrid AWD-i uses ATF in its rear electric motor and reduction gear assembly. Identify the generation, year, market, engine and transmission from the VIN before selecting either a fluid or an interval. In brief: Toyota’s schedule for a petrol RAV4 XA50 AWD calls for transfer and rear differential oil inspection every 20,000 km or 12 months, with replacement at 40,000 km or 48 months. Under severe use, replacement moves forward to 20,000 km or 24 months. The automatic transmission or CVT, including its integrated front final drive, follows a different service line. When service should no longer wait Mileage alone does not reveal the condition of the lubricant. Arrange an additional inspection if any of these signs appears: The maintenance deadline has arrived. Even a low-mileage vehicle sees oxidation, moisture and repeated heat cycles, so the calendar limit matters as much as the odometer. A whine changes between acceleration and overrun. Tyres and wheel bearings can sound similar, but the final drive, differential bearings or an incorrect fluid level may also be responsible. Fresh oil is visible around a housing, plug or oil seal. Clean light staining and recheck it; repair an active leak before a longer journey can lower the level far enough to damage the unit. The lubricant looks cloudy or milky after deep-water driving. Water greatly reduces lubricating performance, so the next scheduled visit is no longer an appropriate deadline. The drain-plug magnet carries obvious chips. A soft metallic paste after long service may be normal, whereas larger fragments call for investigation before the unit is refilled and returned to use. When a shorter interval makes sense Toyota classifies towing, heavy loading, prolonged high-speed operation and some extended low-speed use as severe conditions. For the petrol AWD transfer and rear differential, the severe replacement interval is 20,000 km or 24 months, whichever comes first. An unscheduled check is also sensible after water crossings, a substantial underbody impact, driveline repairs or any leak. On a vehicle that regularly works in heat, sand, mountains or with a trailer, inspect the fluid at each routine service even when the formal replacement limit has not arrived. What old or unsuitable lubricant can cause Gear oil maintains a strong film on teeth and bearings, carries heat away and suspends wear debris. ATF and CVTF must also support hydraulic control and friction elements. Those jobs are not interchangeable, so one supposedly universal product must not be poured into every RAV4 driveline housing. Film strength falls. Under high load, tooth surfaces run with less protection and both temperature and noise begin to rise. Oxidation promotes deposits. The fluid darkens, loses stability and performs less consistently after long motorway runs or towing. Contamination attacks bearings and working surfaces. Circulating metal becomes an abrasive and accelerates the next stage of wear. The wrong viscosity or specification can produce whine, vibration or poor AWD coupling behaviour. Substituting GL-5 axle oil for ATF in a hybrid rear motor assembly is a particularly serious mistake. Skipping diagnosis can turn routine service into a major repair. As a broad UAE guide, servicing a rear differential and transfer unit may cost AED 450–900, correcting a leak AED 700–2,000, and repairing a damaged differential or transaxle assembly can exceed AED 3,500–15,000 depending on the fault and labour involved. Important: a published total capacity is not the quantity that will necessarily drain during routine service. Set the level by Toyota’s procedure at the specified temperature and vehicle attitude; overfilling can be as harmful as underfilling. Fluids and reference capacities The figures below apply to current XA50 references. Several transmissions and AWD systems exist within the same model line, so use the table as an identification aid rather than a substitute for checking the VIN and build specification. Toyota’s official manual contains the exact product descriptions, level-setting procedure and cautions. Verify the entry for the vehicle’s model year and destination market before buying fluid. Schedule for normal and severe use For a petrol RAV4 AWD in normal service, Toyota calls for transfer and rear differential oil inspection at 20,000 km or 12 months and replacement at 40,000 km or 48 months. Automatic transmission or CVT fluid, which also lubricates the integrated front final drive, appears on its own maintenance line. Under severe loading, the manual lists inspection of AT/CVT fluid including the front differential at 40,000 km or 24 months and replacement at 80,000 km or 48 months. The transfer and rear differential interval is shorter: 20,000 km or 24 months. Water entry or a loss of level requires immediate diagnosis regardless of mileage. How to service the units safely Identify the vehicle first. Record the VIN, model year, market, engine code, transmission type and AWD system; the description “RAV4 AWD” is not precise enough to order the correct lubricant. Confirm that the fill plug can be opened before draining. A seized or damaged plug must not leave the vehicle with an empty housing and no practical way to restore the level. Use only the specified fluid and new sealing washers. Gear Oil LX 75W-85 GL-5 belongs in the applicable transfer and rear differential units, ATF WS in the Toyota transmission and hybrid assemblies that specify it, and CVT Fluid FE in the relevant continuously variable transmissions. Set the level with the vehicle horizontal and follow the temperature procedure. AT/CVT level adjustment is more involved than filling a housing to the lower edge of a plug, so specialist equipment is the safer choice when the procedure cannot be followed accurately. Clean the housings after service, complete a road test and inspect the plugs and seals again. Keep the product name, specification, quantity, mileage and date on the invoice for the next inspection. If purchase price and future maintenance are being assessed together, current listings provide a useful comparison between RAV4 vehicles of the same generation, driveline and model year. Why a whine may appear after service A new noise does not automatically mean fresh fluid has damaged the unit. Service more often exposes existing wear or a mistake in product selection, level or procedure. Work through the likely causes in order: Incorrect specification. A lubricant may have the expected viscosity yet the wrong approval, changing coupling behaviour or noise; packaging and the word “synthetic” do not establish compatibility. Incorrect level. Too little fluid reduces lubrication, while too much may foam and overheat. Recheck the level on a flat surface using the procedure for that exact assembly. Mixed products. A residue of unknown fluid can alter viscosity and additive balance. Gear oil must never be treated as interchangeable with ATF or CVTF. Worn bearings or gear teeth. New lubricant cannot rebuild mechanically damaged surfaces, so a whine that existed before service may remain afterwards. A different source. Tyre tread, a wheel bearing, propeller shaft, underbody shield or the hybrid electric motor can imitate differential noise. Checks to complete before authorising repairs First confirm the fluid against its product number and invoice, measure the actual level, inspect the drained lubricant for water and particles, and then reproduce the noise on the road. Comparing acceleration, overrun and cornering helps separate final-drive noise from tyres or wheel hubs. After correcting the level or repairing a leak, repeat the road test and inspect for seepage. Dismantling becomes reasonable only after simple causes have been excluded and the symptom documented; that order reduces the risk of replacing sound components. Conclusion There is no single “differential oil” for every Toyota RAV4. A front-wheel-drive model has no separate rear unit, a petrol AWD uses Gear Oil LX in its transfer and rear differential, and a hybrid AWD-i uses ATF WS in the rear motor-reduction assembly. Follow the VIN and the official manual: in normal use, inspect the separate petrol AWD units at 20,000 km or 12 months and replace their oil at 40,000 km or 48 months; under severe use, bring replacement forward to 20,000 km or 24 months.
For a 2024 petrol Toyota RAV4 with mechanically driven all-wheel drive, Toyota schedules a transfer-unit oil inspection at 15,000 miles or 18 months and replacement at 30,000 miles or 36 months, whichever limit is reached first. Those figures do not apply to every RAV4. Front-wheel-drive vehicles have no separate transfer case, while hybrid versions with an electrically driven rear axle use a different layout. Confirm the architecture by VIN, model code, and the hardware fitted to the car before buying fluid. A petrol AWD model sends torque rearward through an angle drive and propeller shaft. An AWD badge on a hybrid may instead refer to a dedicated rear electric motor without a conventional mechanical transfer case. Requirements can also vary within one generation according to model year and destination market. Key point. For a 2024 petrol RAV4 with mechanical AWD, the reference points are 15,000 miles or 18 months for inspection and 30,000 miles or 36 months for replacement. This is not a universal RAV4 schedule: verify drive type, model year, and market by VIN first. When Does a RAV4 Transfer Unit Need an Early Check? The scheduled interval assumes that the unit is sound and sealed. Inspect it sooner after an underbody strike, water exposure, fresh oil residue, or the purchase of a car with an unclear maintenance record. A fluid change should never take the place of finding the cause of a fault. The AWD design has not been verified. A badge or trim name does not show how the rear axle is driven. Match the VIN and model code to the manual and confirm that a mechanical transfer unit is physically present before arranging service. Oily dust is visible on the undertray or housing. Examine the fill and drain plugs, case joint, and shaft seals. Clean the area, drive a short distance, and inspect it again; this makes old residue easier to distinguish from active seepage. The vehicle has encountered water or suffered an underbody impact. A RAV4 should not be treated as a deep-water vehicle. Water entering through a damaged seal or breather weakens lubrication, while a distorted shield can damage the housing. Cloudiness, foam, or emulsion calls for correction of the cause and a complete fluid change. The sound changes during acceleration or deceleration. Humming, shudder, or a brief grinding noise can originate in the transfer unit, rear differential, propeller shaft, wheel bearings, tyres, or an electromagnetic AWD clutch. Locate the source and check AWD fault data before blaming the lubricant. Previous service cannot be documented. A statement that the oil was changed is incomplete without a date, mileage, and product name. On a used RAV4, establish the hardware, inspect the level and sealing, and create a new traceable maintenance baseline. How Heat, Sand, and Carrying Loads Affect the Unit High ambient temperature, loose surfaces, and long journeys at high vehicle weight add heat to the AWD components. Some Toyota schedules specify extra work for towing, a car-top carrier, or sustained heavy loading. Heat alone, however, is not permission to substitute a thicker lubricant or invent a shorter interval. External sand does not pass through a sealed housing, but it holds oil residue and obscures inspection. After dusty-road use, clean the undertray and case without directing high-pressure water at seals or connectors. Then examine the plugs, shaft areas, and nearby assemblies. Engine, transmission, or rear-differential fluid can travel across a shield and imitate a transfer-unit leak. What Happens When the Oil Level Is Low or the Fluid Is Contaminated? The compact transfer unit holds a modest amount of lubricant, so even a slow leak can remove a meaningful share of its protection. Temperature and surface loading rise first, followed by noise and accelerated wear. Once the damage is mechanical, new fluid cannot restore bearings or gear contact surfaces. The protective film becomes less reliable. With a low level, some surfaces receive less oil, particularly after a long journey with the housing at a stable high temperature. Contaminants continue to circulate. Wear debris and moisture pass through loaded contact zones, alter additive performance, and speed up damage to moving components. Noise and vibration increase. Bearing and gear wear creates additional clearance. Symptoms may occur only under drive or on overrun, so quiet operation with the vehicle lifted does not necessarily rule out a problem. Leakage begins to reinforce the fault. Heat and increasing clearance load the seals, the level falls more quickly, and accumulated dirt conceals the original path of the oil. Advanced damage requires repair. Large metallic fragments, obvious free play, persistent humming, or damaged gear teeth cannot be addressed by fluid service alone. Diagnosis determines the repair scope. Important. New oil cannot correct mechanical wear. If humming, vibration, an AWD warning, or leakage remains after service, diagnose the transfer unit and neighbouring components. What Toyota Specifies for a Mechanically Driven AWD RAV4 In Toyota’s maintenance guide for a 2024 petrol RAV4 with mechanical four-wheel drive, the transfer-unit oil is inspected at 15,000 miles or 18 months and replaced at 30,000 miles or 36 months. The notes attached to towing, a car-top carrier, and heavy loading must also be read before applying the schedule. For another model year, destination market, or hybrid powertrain, select the matching document from the manuals directory. VIN and model-code information takes priority over a generic retailer recommendation or a conveniently selected container label. How to Apply the Maintenance Interval Correctly Measure the interval from the last documented inspection or replacement and track both time and mileage. When either limit arrives first, do not wait for the other. Record the date, odometer reading, exact lubricant, batch or repair-order reference, and the condition of the removed sealing washers after every service. Assess the duty cycle separately. Routine towing, permanent heavy loads, and extended unpaved-road use differ from one short trip with a roof carrier. Match the real pattern to the notes in the schedule for the correct model year and market rather than automatically labelling every urban vehicle as severe service. Choosing the Oil Without Confusing the Driveline Units The RAV4 name and an AWD badge are not enough to select a container. Ordering requires the model year, VIN, model code, and transmission type. Use the manual to verify the fluid specification, reference capacity, sealing parts, and plug torque. Set the final level by the prescribed procedure with the vehicle positioned correctly. Do not carry the rear-differential specification over to the transfer unit. Both may use driveline lubricants, but their viscosity and additive requirements can differ. Do not use ATF merely because the transfer unit is attached to an automatic transaxle. Proximity or a shared exterior assembly does not prove that the lubrication circuits are the same. Do not choose a thicker product as a hot-climate upgrade. The factory requirement already accounts for operating temperature; alter it only where Toyota expressly provides an alternative. Do not treat the entire bottle as the fill quantity. Published capacity helps with preparation, but the correct level is set by the fill opening and the manufacturer’s procedure. What Can Drained Oil and RAV4 Behaviour Reveal? Fluid condition contributes evidence but is not a diagnosis by itself. Fine, even paste on a magnet is evaluated differently from large reflective fragments; an overheated odour or milky appearance needs investigation. Check the propeller shaft, rear differential, wheel hubs, tyres, mounts, and AWD controls at the same time. A noise that changes in a bend, under acceleration, or on overrun helps narrow the search. Practical Service Checklist ☐ Confirm by VIN and hardware that the RAV4 has mechanical AWD and a separate transfer unit. ☐ Record the model year, model code, destination market, mileage, and last service date. ☐ Open the manual for this exact version and read the operating-condition notes. ☐ Identify when the fluid was last inspected or changed and which product was used. ☐ Inspect the undertray, housing, plugs, joints, shaft seals, and nearby assemblies for leakage. ☐ Before draining, confirm that the fill plug can be removed with the correct tool. ☐ Check the drained oil for water, an overheated odour, and visible metallic fragments. ☐ Use the verified specification and renew sealing parts where the procedure requires them. ☐ Set the level, tighten the plugs as specified, and recheck for leakage after a road test. Mistakes to Avoid Servicing a unit before identifying the drive system. FWD, mechanical AWD, and electric AWD use different components and fluids. Applying one market’s interval to another. Matching model years can still use different equipment, schedules, and special-condition notes. Ordering oil by model name alone. The VIN and model code prevent confusion between transfer-unit, differential, and transmission fluids. Masking a hum with thicker oil. Viscosity cannot repair bearings, gears, shafts, or an AWD clutch. Treating fluid replacement as diagnosis. After leakage, impact, or water contamination, correct the cause and recheck sealing. Conclusion The Toyota RAV4 transfer-unit interval depends on model year, market, drive system, and operating conditions. The 2024 petrol guide specifies inspection at 15,000 miles or 18 months and replacement at 30,000 miles or 36 months for mechanical AWD; FWD and electrically driven AWD require different treatment. Confirm the VIN before ordering fluid and arrange an early diagnosis after leakage, impact, or water exposure. Toyota RAV4 current listings can be reviewed separately, but drive type and fluid requirements must be established from the documents for the individual vehicle.
Listings for Toyota RAV4 may include these trims: Adventure, EX, Lux, and EXR, among others. The current selection depends on the selected country, model year, and vehicle availability. Use the “Trim” filter to compare the available options.
Mileage should be assessed together with the vehicle’s age, condition, and service history. Compare the mileage with similar vehicles of the same model year, and check the service history and actual condition of the vehicle before buying.
Current Toyota RAV4 listings on AUTO.AE are priced from 5,700 to 215,000 AED. The price depends on the model year, mileage, trim, condition, and regional specifications. These figures are based on active listings and may change.
A private seller may offer a lower price, while a showroom may provide additional services, such as financing, a warranty, or help with insurance. Terms vary, so check the information in the listing, the vehicle documents, and the seller’s details.
Check the vehicle registration card (Mulkiya), the VIN on the vehicle and in the documents, the owner’s details, the service history, and accident records. Also check for any outstanding loan, fines, or other restrictions. It is advisable to arrange an independent inspection before completing the purchase.
Yes. You can arrange an independent technical inspection with the seller at a service centre of your choice. The inspection can help assess the condition of the engine, transmission, bodywork, electronics, and other components.
GCC Specs means that the vehicle was manufactured to specifications for Gulf Cooperation Council markets. These versions are generally designed for local climate conditions. However, GCC Specs alone does not confirm the vehicle’s condition or mean that it has a valid warranty; these points should be checked separately.
Some showrooms offer financing. If available, the terms or an estimated monthly payment may be shown in the listing. The final interest rate and approval depend on the bank, the down payment, and the buyer’s details.
