Engine block, cylinder head, and crankcase252 offers for Nissan in the Middle East (GCC)

ARP main stud kits help eliminate main cap walk/fretting and protect the threads in your engine block. They include studs made from 8740 chromoly steel and heat-treated in-house to 190,000 psi tensile-strength rating. The precision J-form threads are rolled after heat-treat for much strong

Economical Dura-Bond standard cam bearings feature round babbit construction for low friction, outstanding conformability, and added embeddability. • Brand: Dura-Bond • Manufacturer's Part Number: DA-3A • Part Type: Cam Bearings • UPC: 840321030405 • Bearing Usage: Performance • Bearing M

COMP Cams High Energy camshafts are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These cams offer an increase in both gas mileage and power throughout the rpm range fo

COMP Cams High Energy camshafts are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These cams offer an increase in both gas mileage and power throughout the rpm range fo

COMP Cams High Energy camshafts are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These cams offer an increase in both gas mileage and power throughout the rpm range fo

COMP Cams Magnum solid lifter camshafts are specifically designed for the street enthusiast looking for more power and that Pro Street sound. Whether your choice would be the 270s with low-speed torque and noticeable idle, or the 306s for larger cubic inch engines with tremendous high-rpm

• Brand: Ajusa • Manufacturer's Part Number: 93096900 • Part Type: Camshafts • UPC: 8427769026249

31mm OD. 3.78mm shim. 25mm skirt. Suits reduced base circle diameter. 3.78mm ‘Shim Thickness’ to suit 31.42mm-30.35mm base-circle cams Kelford Cams DLC Coated Buckets Feature: larger internal fillet and reinforced skirt. Increased rigidity increases both camshaft and bucket longevity. DLC

102lb seat pressure at 39.8mm installed height. 293lb at 13.7mm valve lift.

125lb seat pressure. 244lbs at 11.0mm valve liftSHIMLESS Extreme Beehive Valve Spring and Titanium Retainer kit for Nissan RB26DETT engine. Designed for extreme boost and high RPM racing. Made from ultra clean Silicon Chrome spring steel with a higher fatigue resistance compared to other s