Steering system parts 853 offers for Audi in the Middle East

Get rid of the old rubber bushings and install aluminum bushings, which will improve the car's cornering stability. Aluminum subframe bushings will give your suspension the ability to hold the desired geometry under the forces when the car is maneuvering on the road. Now the subframe will

Set of red polyurethane bushings 16 mm for rear stabilizer. The bushings have a hardness of 75 ShA. Polyurethane bushings are ideal for performance suspension applications. Rubber suspension bushings are a proven compromise for performance vehicles. With the addition of extra horsepower an

A set of drop shaped polyurethane bushings for the rear stabilizer bar. They are a perfect fit and replace the original OEM part 893511327B. Polyurethane bushings are great for performance suspension applications. Rubber suspension bushings are a proven compromise for performance vehicles.

When using the car on track it is impossible to setup proper rear camber with OEM arms. The more stress you put on the OEM arms the more the rubber on arm compresses and you loose what was very precisely set during car alignment. Now it is possibile to easily setup and maintain desired cam

This is a complete set of red rear differential bushings. Polyurethane bushings are ideal for performance suspension applications. Rubber suspension bushings are a proven compromise for performance vehicles. With the addition of extra horsepower and larger tires, stock or rubber bushings t

Black set for both front wishbones (left and right) of polyurethane bushings. Polyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber b

Set for one front anti-roll bar of 29 mm polyurethane bushings (street hardness - 75 ShA). Polyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OE

– T45 (BS4T45 to BS4T100) tubing – proven motorsport M18 uniballs (Motorsport HEAVY DUTY series from RODOBAL [Italy] with reinforced PTFE anti-friction liner, preloaded tight fit, have forged body, out of 42CrMo4 heat treated steel, for maximum load capacity. The inner ring is out of 100Cr

Using same T45 tubing as in WRC cars, this subframes provide increased stiffness and mass reduction. All factory parts bolt up to this unit, no other modifications are necessary. Features: – better access to car under body and enables wishbones change with out subframe removal – T45 (BS4T4

This is a full set of two front anti roll bar polyurethane bushings for 28 mm bar. Polyurethane bushings work ideally with performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or r

This is a complete kit for your vehicle's front cross arms (inner and outer red 75 ShA street stiffness bushings). Polyurethane bushings are ideal for performance suspension applications. Rubber suspension bushings are a proven compromise for performance vehicles. With the addition of extr

Setting the suspension geometry of a car always starts from the rear axle and it mainly depends on it how the car drives. VERKLINE rear subframe billet aluminum inserts are designed to eliminate movement of the factory rear subframe and to maintain proper suspension geometry when cornering

With this product you can use full potential of your Sway Bar (Anti-roll bar) and not waist any time for response when the rubber flexes. They are direct replacement for factory unitis. This is fully reversible operation. Install takes only about 15 minutes. Features CNC machined from aero

The street stiffness of the rear stabilizer bushings is 75 ShA. Replaces part 4A0 511 327. What is included in the kit : Two red ARB polyurethane bushings for the rear of the vehicle. Lubricant for installing the bushings.

Set of 16mm black polyurethane bushings for rear stabilizer bar. Hardness is 85 ShA. Polyurethane bushings are ideal for performance suspension applications. Rubber suspension bushings are a proven compromise for performance vehicles. With the addition of extra horsepower and larger tires,

The arm kit (replica) provides the greater strength needed to withstand the much greater loads and significant geometry changes that are also required for efficient use. Proven on racing and rally cars. What’s Included Two wishbones (E355 N / St 52.4 steel) for front axle. Two wishbones (E

The two-piece top mount is a direct replacement for the rubber part. What's Included : Set of two aluminum top mounts for one axle. Fluro bearings and steel retaining ring. Six M6 grade 8.8 hex head screws for tightening the upper and lower sections of the top mount. Cap nuts and spacer fo

Polyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design limits. Polyurethane bushings are strong

Set for one axle (both left and right hand sides included) of polyurethane bushings. Polyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or r

Front Red Lower Shock Mounts – 2 pieces. Polyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower is added, plus size tires then OEM or rubber bushings tend to stress beyond design

Black set for all rear wishbones of polyurethane bushings for cars with steel upper arms. Includes the missing bush that Powerflex does not carry. Polyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When

This is a set of polyurethane bushings for one axle (85 ShA). Two sets must be ordered for front and rear axle. Polyurethane bushings are ideal for high performance suspension applications. Rubber suspension bushings are a proven compromise for performance vehicles. With the addition of ex

This is a full set of two front anti roll bar polyurethane bushings for 26 mm bar. Replaces OEM part number: 447 411 327B. Polyurethane bushings work ideally with performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When additional horsepower

Black set for all rear wishbones of polyurethane bushings for cars with cast upper arms. Includes the missing bush that Powerflex does not carry. Polyurethane bushings work ideally in performance suspensions. Rubber suspension bushings are a proven compromise in performance vehicles. When