Запчасти впускной системы двигателя 1 904 предложения для Chevrolet на Ближнем Востоке (GCC)

ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more

ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and

MSD LT1 Airforce intake fastener kits serve as high-quality bolt replacements, specifically designed for the MSD Airforce intake manifold. The Allen head style bolts are made from stainless steel with a natural finish and come with washers to facilitate fuel injection throttle body attachm

Edelbrock intake manifold bolts are specifically designed to work with their manifolds, including the Performer, Performer RPM, and Torker series. They feature reduced hex heads for easy wrench access, an attractive cadmium finish for corrosion resistance, and hardened washers. All bolts a

ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more

These Chevrolet Performance Vortec intake manifold bolts will secure your intake manifold properly to your Vortec cylinder heads. They have the factory thread sealer already on the threads, and use a standard hex head for easy installation and removal. Chevrolet Performance makes installin

Moroso intake manifold bolts are made from tough Grade 8 steel for high strength, and have a clear zinc plated finish that's great for appearance and corrosion resistance. To ease the installation and removal of modern manifolds, with their very limited clearances, these bolts have 12-poin

These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds. • Brand: Mr. Gasket • Manufacturer's Part Number: 957G • Part Type:

These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These

ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more

ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and

These special Grade 8 intake manifold bolts from Mr. Gasket feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runnered race manifolds. These

Chevrolet Performance offers these intake manifold bolts for securing your manifold with confidence. They're rated at 170,000 psi and will give consistent torque load. • Brand: Chevrolet Performance • Manufacturer's Part Number: 12367959 • Part Type: Intake Manifold Bolts

ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more

ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more

These show quality intake manifold bolts from Mr. Gasket are individually polished to a high luster, then chrome plated for lasting beauty. They're ideal for street rods and street machines, or any vehicle requiring show quality chrome. • Brand: Mr. Gasket • Manufacturer's Part Number: 50

ARP stainless steel intake manifold bolts are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. These bolts are both corrosion and

ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more

These Manley intake manifolds are available in hex head and 12-point styles. The hex head bolts have a black oxide finish and the 12-point bolts have a gold iridited finish. These manifold bolts include hardened washers for a complete installation. • Brand: Manley • Manufacturer's Part Nu

Moroso intake manifold bolts are made from tough Grade 8 steel for high strength, and have a clear zinc plated finish that's great for appearance and corrosion resistance. To ease the installation and removal of modern manifolds, with their very limited clearances, these bolts have 12-poin

These Spectre Performance intake manifold bolts are constructed from Grade 5 steel. They're available in several head styles and finishes to suit your needs. • Brand: Spectre Performance • Manufacturer's Part Number: 4652 • Part Type: Intake Manifold Bolts • UPC: 089601465203

These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds. • Brand: Mr. Gasket • Manufacturer's Part Number: 955G • Part Type:

MSD LS Airforce intake fastener kits serve as high-quality bolt replacements, specifically designed for the MSD Airforce intake manifolds (2701 and 2702 models). The Allen head style bolts are made from stainless steel with a natural finish and come with washers to facilitate fuel injectio

ARP rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. They're precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. They also feature precision-rolled threads, which prevent galling, while promoting more