Блоки, головки и картеры двигателя2 796 предложений для Chevrolet на Ближнем Востоке (GCC)

Mr. Gasket screw-in rocker arm studs are ideal for high performance cams in cars used primarily on the street. They are constructed from alloy steel, have no oil holes, and are concentric to keep the rockers, pushrod, and valve stems in alignment. • Brand: Mr. Gasket • Manufacturer's Part

ARP Pro Series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. They are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. Wit

ARP Pro Series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. They are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. Wit

Have you ever tried to install a rocker stud into your cylinder head and watched it wobble as it screwed in? Don't take a risk installing bad rocker arm studs that may botch up your Eliminator or Outlaw race cylinder head installation. Just replace the bad with the new--AFR rocker arm stud

ARP Pro Series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. They are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. Wit

These Melling rocker arm studs are made from quality-grade steel for strength and durability. They're designed to keep your rocker arms in place for precise and critical valvetrain adjustment. So, if you want to keep your valve settings correct for a good length of time, rely on Melling to

Replace your stock rocker arm studs with these COMP Cams rocker arm studs. When ultimate strength is required, as with high-rpm roller cam applications, Hi-Tech Race studs are just what you need. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and g

Replace your stock rocker arm studs with Brodix Cylinder Heads rocker arm studs. They work well in applications with moderate lifts and spring pressures and are perfect for high performance applications, too. • Brand: Brodix Cylinder Heads • Manufacturer's Part Number: AR RRS-4I • Part Ty

ARP High Performance Series rocker arm studs are ideal for ET bracket racing, limited rule oval track competition, or street use. Made from 8740 chromoly steel and are heat-treated to 180,000 psi tensile strength, they are concentric within .005 T.I.R. thread pitch to thread pitch, which w

Dart Pro series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. These studs are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geome

Engine Works rocker arms studs give you more consistent rocker geometry to keep the rockers, pushrod, and valve stems in alignment. Each stud is machined from 8740 alloy tool steel, roll-threaded, heat-treated and finished with a black oxide, corrosion-resistant finish. Studs are available

Have you ever tried to install a rocker stud into your cylinder head and watched it wobble as it screwed in? Don't take a risk installing bad rocker arm studs that may botch up your Eliminator or Outlaw race cylinder head installation. Just replace the bad with the new--AFR rocker arm stud

ARP Pro Series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. They are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. Wit

Dart Pro series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. These studs are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geome

Trick Flow® rocker arm studs are ideal for street or competition use. These studs are made from 8740 chromoly steel. • Brand: Trick Flow Specialties • Manufacturer's Part Number: TFS-41400613 • Part Type: Rocker Arm Studs • UPC: 842645109430

ARP High Performance Series rocker arm studs are ideal for ET bracket racing, limited rule oval track competition, or street use. Made from 8740 chromoly steel and are heat-treated to 180,000 psi tensile strength, they are concentric within .005 T.I.R. thread pitch to thread pitch, which w

Allstar Performance rocker arm stud kits are Grade 8 original equipment style studs. These small block Chevy kits feature 3/8 in.-24 OE-style studs and require a 7/16 in.-14 tapped hole in the cylinder head. Install your rocker arms with the quality and value of an Allstar stud kit. • Bra

Trick Flow® rocker arm studs are ideal for street or competition use. These studs are made from 8740 chromoly steel. • Brand: Trick Flow Specialties • Manufacturer's Part Number: TFS-51400614-8 • Part Type: Rocker Arm Studs • UPC: 842645110191

These Melling rocker arm studs are made from quality-grade steel for strength and durability. They're designed to keep your rocker arms in place for precise and critical valvetrain adjustment. So, if you want to keep your valve settings correct for a good length of time, rely on Melling to

ARP High Performance Series rocker arm studs are ideal for ET bracket racing, limited rule oval track competition, or street use. Made from 8740 chromoly steel and are heat-treated to 180,000 psi tensile strength, they are concentric within .005 T.I.R. thread pitch to thread pitch, which w

Manufactured from tough 8740 steel, these rocker arm studs from Howards Cams feature a large ground radius fillet to provide increased support to the stud shank, effectively eliminating bending and breakage. These studs are precision-machined with rolled threads, heat-treated for a tensile

ARP High Performance Series rocker arm studs are ideal for ET bracket racing, limited rule oval track competition, or street use. Made from 8740 chromoly steel and are heat-treated to 180,000 psi tensile strength, they are concentric within .005 T.I.R. thread pitch to thread pitch, which w

Dart Pro series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. These studs are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geome

ARP Pro Series rocker arm studs are ideal for competition applications. They are made from 8470 chromoly steel and are heat-treated to 200,000 psi tensile strength. They are concentric within .005 T.I.R. thread pitch to thread pitch, which will give you more consistent rocker geometry. Wit