بيع سيارات جديدة ومستعملة Nissan Altima 2000في الشرق الأوسط (GCC)

  • تمويل السيارة

    مع الضمان

    • جيل
  • نوع الجسم
    الإرسال
  • محرك
    الدفع
  • l
    l
  • سنة من
    إلى
  • كم
    إلى 49,183 كم
  • درهم
    درهم

لم يتم العثور على شيء

يرجى تغيير الفلاتر لإيجاد الإعلانات التي تحتاجها.

أسعار فئات Nissan Altima في دول مجلس التعاون الخليجي (GCC)

يبدأ سعر Nissan Altima من 6,500 AED ويصل إلى 119,381 AED. قد تختلف التكلفة النهائية على الطريق قليلاً حسب التأمين والتسجيل والملحقات الاختيارية.

ديناميكيات الأسعار والسيولة Nissan Altima

يوضح الرسم البياني ديناميكيات متوسط سعر الطراز في سوق السيارات المستعملة خلال العام الماضي. تساعدك هذه البيانات على تقييم جدوى الشراء وتوقع القيمة المستقبلية للسيارة.

قد تختلف الأسعار على AUTO.AE عن تكلفة البيع الفعلية. تستند البيانات إلى قاعدة بياناتنا من السيارات المباعة والإعلانات الحالية. للحصول على تقييم دقيق، استخدم أداتنا.

أخبار Nissan Altima

  • ‌

    When to change the oil filter on a Nissan Altima

    Replace the Nissan Altima oil filter whenever you change the engine oil. The correct timing depends on the model year, engine and driving conditions, so mileage alone is not enough. Short journeys and extended idling deserve particular attention in a city-driven sedan. This guide explains how to establish the service interval, select the filter and check the work after replacement. Key point. Fit a new filter when changing the engine oil. Establish the timing using your Altima’s documents, driving conditions and applicable service indication. When the filter needs attention Scheduled replacement should happen before a fault develops. There is no driver-readable gauge showing how much useful life remains in the filter. The situations below call for different responses, from a routine service appointment to an urgent inspection. • The service deadline is approaching. Compare the current date and mileage with the last invoice. Where the schedule sets both a time and a distance limit, use whichever comes first. • The service history is unclear. Ask for invoices when buying a used Altima. If replacement cannot be confirmed, arrange an oil and filter change with the workshop to establish a reliable starting point. • Fresh oil appears around the filter. It may be residue from servicing, but a leak is also possible. Have the area cleaned and checked; tightening the filter further without inspection can make matters worse. • An oil pressure warning appears while the engine is running. Stop safely and switch off the engine. Do not continue driving until the cause has been checked: this is not a routine filter replacement reminder. Why city driving can mean severe use The Nissan maintenance schedule lists dusty conditions, repeated short journeys and extensive idling among severe operating conditions. Check how the relevant provisions affect oil and filter servicing for your Altima. Describe your actual routine to the workshop: a short commute, slow traffic or waiting for passengers with the engine running. The car may cover few kilometres while the engine runs for a substantial amount of time. Two Altimas with the same mileage can therefore have quite different service needs. Do not postpone replacement simply because the car spends most of its time parked. The time limit still matters. If your usual driving pattern changes, review the schedule in advance instead of waiting for the engine to behave differently. Why the oil and filter are changed together The MANN-FILTER technical explanation describes how an oil filter traps contaminants circulating with the lubricant. A used element has already collected particles, and fresh oil does not restore its capacity. Fit a new filter when changing the engine oil. A clean outer casing says nothing about the condition of the filter media. External appearance is not a useful measure of remaining service life. As contaminants accumulate, resistance to oil flow can increase. Listening to the engine cannot establish the filter’s flow capacity. A bypass valve, where fitted, lets oil bypass the media when resistance is high. This protection does not extend the scheduled replacement interval. Replacing the filter will not resolve every lubrication fault. Warnings, leaks or unusual noise require diagnosis before assuming that a new filter is the answer. Important. An oil pressure warning with the engine running calls for a safe stop and engine shutdown. Do not continue driving until the cause has been checked. How to establish your Altima replacement interval The official Nissan FAQ gives a general periodic service guideline of 10,000 km or six months, whichever comes first. This is not a universal oil interval for every Altima. Check it against your vehicle’s documents, engine and operating conditions. For the Altima L34, a maintenance schedule note specifically calls for an oil and filter change as soon as possible when the oil replacement indicator appears, followed by resetting the display. This service reminder is different from a low oil pressure warning. How to choose the correct filter Altimas from different model years have different engines. For example, Nissan’s 2023 model announcement lists a 2.5-litre engine and a 2.0-litre VC-Turbo. That does not establish filter interchangeability. Order using the VIN, model year, engine and a verified part number. Do not confuse an engine oil filter with a CVT transmission filter. When browsing current offers for a Nissan Altima, ask about oil servicing before buying. A part number on an earlier invoice is useful for cross-checking, but does not prove the previous selection was correct. If the engine has been replaced, the installed unit must be taken into account. What a proper replacement includes • Checking the oil. The workshop should verify viscosity and the required specification for the particular engine. The word “synthetic” on the bottle is not enough to establish suitability. • Installing the filter. With a spin-on filter, check the sealing surface and ensure the old gasket has been removed. Prepare the new seal and tighten the filter according to the instructions for that application. • Checking the result. Inspect the filter and drain plug for leaks, then check the oil level using the vehicle’s specified procedure. Do not use a refill quantity quoted for an Altima with a different engine. Keep the invoice showing the oil brand, specification and filter part number. Reset the maintenance reminder after the work has been completed and agree the next service deadline using the vehicle’s schedule. What to check after servicing Look at the parking space after the first few journeys. Report fresh drips, an oil smell or an unfamiliar noise to the workshop, explaining when it started. Do not assume such changes are part of normal “bedding in”. Oil colour alone cannot establish whether the filter was replaced. Checklist before leaving the workshop ☐ Get the filter part number and confirmation of VIN-based selection. ☐ Check the oil name, viscosity and specification on the invoice. ☐ Confirm that the necessary new seals have been fitted. ☐ Confirm that the oil level and absence of leaks were checked. ☐ Record the next service date and mileage deadline. ☐ Keep the invoice with the vehicle’s service history. Common oil filter servicing mistakes • Keeping the old filter when changing the engine oil. • Choosing a filter only because its casing size or thread matches. • Copying another Altima’s interval without checking the year and engine. • Leaving the old gasket on the mounting surface or overtightening the filter. • Treating a reset reminder as proof that the service was completed. Conclusion Replace the Nissan Altima oil filter together with the engine oil according to your vehicle’s schedule. Account for time, mileage and driving conditions, and select consumables by VIN and engine. After servicing, check the oil level and sealing, keep the invoice and record the next replacement deadline.

  • ‌

    How often to change the engine oil in a Nissan Altima

    Change the engine oil in a Nissan Altima at the time or mileage limit in its own maintenance plan. Nissan Dubai gives a general routine-service interval of 10,000 km or six months, whichever comes first. Older models and severe operating conditions may require a different schedule. This article explains how to establish the deadline, select oil and check the completed work. It focuses on the petrol 2.5-litre Altima; confirm consumable specifications separately for other engines and model years. Finding the interval for your Altima The Nissan Dubai website lists a general service interval of 10,000 km or six months. Before booking, ask which schedule applies to your VIN and what it requires for oil and filter replacement. The general recommendation should not be applied automatically to every model year. An earlier Nissan maintenance programme includes servicing every 5,000 km for the Altima L32 and L33. This helps explain the different figures in older paperwork. That document does not set the schedule for a current Altima; use the plan for the individual vehicle. Accounting for elapsed time If a 10,000 km or six-month interval has been confirmed for your car, use whichever limit arrives first. The following are calculation examples, not a separate Nissan schedule. When to discuss more frequent changes Tell the technician about frequent short trips, hot-weather congestion, prolonged idling and dusty roads. A short daily commute and regular motorway driving create different operating conditions even when the monthly mileage is similar. Ask the workshop to check the severe-use section of the applicable schedule and record the next deadline. If the oil-change reminder appears early, establish why and follow the vehicle’s instructions. Do not reset it yourself simply to postpone servicing. Selecting the engine oil The current local Altima specifications list a 2.5-litre direct-injection engine. However, the model name and displacement alone are insufficient for ordering oil and a filter. Use the VIN, model year and exact engine version. Which specifications to check Find the required SAE viscosity and API or ILSAC performance standard in the vehicle’s manual. Match these to the specific product label. “Synthetic” describes the oil type; it does not replace checking the required specifications. The Nissan motor oil range includes 0W-20 SP/GF-6 and 5W-30 SP/GF-6. These are product examples, not universal Altima recommendations. Select an oil permitted for the engine and its operating conditions. Do not switch to thicker oil solely because the weather is hot or the mileage is high. If a workshop proposes a different viscosity, ask for the supporting documentation. Noticeable oil consumption calls for assessment of the cause rather than guessing at a thicker product. How much oil to buy Confirm the refill quantity for a change with the filter. The bottle size and the system’s total capacity do not necessarily match a routine service refill. Establish the final level using the vehicle’s checking procedure; do not overfill. Ask for the quantity to be listed in the estimate before work begins. If supplying your own consumables, agree on the exact oil product and filter part number in advance. Selecting only by “Altima 2.5” may overlook differences between generations. What the oil change should include Confirm replacement of the oil filter and required seals, plus a level and leak check. Engine oil and CVT transmission fluid servicing are separate jobs using different, non-interchangeable fluids. They should appear separately on the invoice. Checking the completed service ☐ The invoice lists the oil product, viscosity, performance standard and quantity. ☐ The new oil filter part number is recorded. ☐ The level has been checked as instructed, with no leaks. ☐ The service date and mileage are documented. ☐ The next due date and mileage are clear; the reminder was reset after the work. Checks between oil changes Check the level regularly and before a long journey. Use level ground and follow the manual’s engine-temperature and waiting-time instructions. If a top-up is needed, use suitable oil without exceeding the upper mark. Record the quantity and mileage if top-ups recur. Distinguishing reminders from pressure warnings A service reminder helps you plan an oil change. A low oil-pressure warning with the engine running requires a safe stop and switching off the engine. Arrange assistance; adding oil alone does not establish that the fault has been resolved. Check indicator descriptions in the vehicle’s documentation or Nissan Driver’s Guide if the app supports your version. It explains functions and warnings rather than replacing the individual maintenance plan. Questions when buying a used Altima Request several consecutive service invoices. Compare dates, mileages, consumable details and reasons for unscheduled repairs. A single fresh oil change before sale does not show how the car was maintained previously. Allow for initial servicing where the history has gaps. Conclusion A Nissan Altima needs the applicable maintenance schedule, suitable oil and documented changes. Track elapsed time alongside mileage, discuss severe use with the workshop and retain invoices. Check oil specifications and refill quantity against the individual engine. When comparing current offers for a Nissan Altima, assess the maintenance records alongside the vehicle’s condition. They help you plan the costs after purchase.

  • ‌
    شراء

    Nissan Altima, 2012

    Chassis No.: 1N4AL2EP0CC152379 Auction: Kissimmee 2022 Auction date: January 16, 2022 Lot No.: U242 $3,300 | Sold • Exterior: Gray • Interior: Gray • Lowered • Air conditioning • Double DIN radio • 80,000 actual miles 2.5L, Automatic https://www.mecum.com/lots/498695/2012-nissan-altima/

أسئلة وأجوبة حول Nissan Altima (FAQs)