Be the first to know about new ads
Save your ad search filters, and find the ads you need faster.
1 - 1 ad
out of 1
Nissan Altima price starts from AED 6,500 and goes up to AED 119,381. Final on-road price may vary slightly based on insurance, registration, and optional accessories.
Nissan Altima Sedan
Best place to buy
Nissan Altima Continuously Variable Transmission (CVT)
Nissan Altima Continuously Variable Transmission (CVT)
Best place to buy
Nissan Altima Petrol
Best place to buy
Nissan Altima 2026
Best place to buy
Nissan Altima 2025
Best place to buy
Nissan Altima 2024
Best place to buy
Nissan Altima 2023
Best place to buy
Nissan Altima 2022
Best place to buy
Nissan Altima 2021
Best place to buy
Nissan Altima 2020
Best place to buy
Nissan Altima 2019
Best place to buy
Nissan Altima 2018
Best place to buy
Nissan Altima 2017
Best place to buy
Nissan Altima 2016
Best place to buy
Nissan Altima 2015
Best place to buy
Nissan Altima 2014
Best place to buy
Nissan Altima 2013
Best place to buy
Nissan Altima 2012
Best place to buy
Nissan Altima 2011
Best place to buy
Nissan Altima 2010
Best place to buy
Nissan Altima 2008
Best place to buy
Nissan Altima Sharjah
Best place to buy
Nissan Altima Ajman
Best place to buy
Nissan Altima Dubai
Best place to buy
Nissan Altima Abu Dhabi
Best place to buy
Nissan Altima Muscat
Best place to buy
Nissan Altima Al Buraymī
Best place to buy
Nissan Altima As Suwayq
Best place to buy
Nissan Altima Barkā’
Best place to buy
Nissan Altima Sohar
Best place to buy
Nissan Altima Al Khābūrah
Best place to buy
Nissan Altima Riyadh
Best place to buy
Nissan Altima Umm Al Quwain
Best place to buy
Nissan Altima Dammam
Best place to buy
Nissan Altima Jeddah
Best place to buy
Nissan Altima Medina
Best place to buy
Nissan Altima Mecca
Best place to buy
The chart shows the dynamics of the model's average price on the used market over the past year. This data helps you assess whether the purchase is attractive and forecast the car's future value.
Prices on AUTO.AE may differ from the actual selling price. Data is based on our database of sold vehicles and current listings. For an accurate estimate, use our tool.
Replace Nissan Altima brake pads and rotors according to wear and damage. In daily urban use, their life depends on the number of stops, vehicle load and caliper operation. Mileage helps you plan inspections but cannot set a replacement date. Inspect every pad and measure the rotors before deciding what needs changing. The focus is on L32, L33 and L34 Altima sedans. Confirm component dimensions, wear limits and parking brake design using the VIN and fitted assembly. Do not transfer these specifications between generations. Earlier cars, coupes and hybrid versions require their own service information. In brief. There is no universal replacement mileage. Assess pads and rotors by wear, damage and the limits for the exact part. Generous lining thickness does not rule out overheating, binding or rotor damage. Identify the Brakes Fitted to Your Altima Record the VIN, build year and engine before ordering. Check the axle position, caliper type and trim restrictions in the catalogue. On a used vehicle, compare these details with the fitted components: previous repairs or modifications may have changed the original configuration. Pads must match the required shape, thickness and mounting. For rotors, check diameter, height, mounting dimensions and construction. Include fitting hardware and anti-noise shims in the parts check. A photo or an advertisement saying “for Altima” cannot establish compatibility on its own. L32. Confirm the body type and powertrain; do not assume that every version uses the same parts. L33. Check applicability for the exact year, engine and axle position. L34. Also account for the parking brake type and rear assembly specification. Modified brakes. Select replacement components for the package actually installed. Why There Is No Universal Replacement Mileage A long journey on an open road and the same distance in heavy traffic impose different loads. Inspect the brakes at the vehicle’s scheduled service points and whenever symptoms appear. If a lining is approaching its limit, arrange another check before a long trip. Thickness alone cannot predict an exact remaining distance. When Replacement Is Necessary Assess each component separately. Pads may wear out before the rotors, while a rotor can suffer damage with substantial lining material remaining. A squeal or visible outer lip alone cannot determine the repair scope. Measurements, surface inspection and a mechanism check are needed. A lining has reached the limit for the fitted package, cracked, separated or become contaminated with oil. A rotor has reached its minimum thickness or its geometry is outside the permitted service tolerance. Inspection reveals dangerous cracks, surface breakdown or damage from severe overheating. Binding has damaged pads or a rotor; the mechanism must be repaired alongside component replacement. If you notice grinding, strong pulling, a leak, smoke from a wheel or a sinking pedal, stop safely and seek assistance. New vibration during ordinary braking also requires diagnosis. Do not investigate a fault by braking hard at high speed. Key rule. Replace pads as an axle set and rotors as an axle pair. Fit new pads when replacing rotors. First correct a caliper fault, contaminated hub face or any other cause of damage. Measurements to Request from the Workshop Brembo’s guidance identifies the minimum rotor thickness as MIN TH. Measure the swept section at several points, clear of the outer lip, and compare the lowest reading with the limit for that exact component. Ask for results by wheel, together with the remaining inner and outer pad thicknesses. What Uneven Pad Wear Can Tell You A large difference in lining thickness calls for checks of pad movement, the caliper piston, slides and dust boots. Restricted movement can remain after new pads are fitted and cause overheating again. Inspect the complete mechanism rather than just the thinnest pad. Correct the cause before replacing damaged components. Wear Warnings and Dashboard Lamps Where an audible wear indicator is fitted, a high-pitched scraping sound while driving may mean that pads need replacement. Do not wait for a dedicated dashboard message. ABS and brake system lamps do not show remaining lining thickness; investigate them separately using the vehicle instructions and diagnosis. Describing Noise and Vibration Tell the technician whether the symptom occurs after overnight parking, with light pedal pressure, after warming up or only when slowing from speed. Identify whether shaking is felt in the steering wheel, pedal or body. Mention vibration that also occurs without braking, as wheels or suspension may be involved. When Vibration Appears After Replacement Brembo’s noise and vibration guidance includes checking hubs, calipers and hardware. Dirt between a rotor and hub, a faulty mechanism or an assembly error can cause the complaint to return. The workshop should measure runout and check installation before deciding to replace the rotors again. What Accelerates Wear in Everyday Driving frequent acceleration and stopping in heavy traffic; repeated hard deceleration from high speed; prolonged braking on descents and heavy loads; incomplete brake release caused by a mechanism fault; corrosion of working surfaces during extended parking; damaged dust boots and dirt entering moving joints; incorrect pads or hardware, or rotor installation errors. With a sound system, smooth deceleration and sufficient following distance reduce the need for repeated hard stops. Avoid resting your foot on the brake pedal. After washing, allow for temporarily reduced performance from wet brakes. Persistent noise, pulling or impaired braking needs inspection. Rear Brakes and the Electric Parking Brake Nissan’s specifications list Altima versions with an electric parking brake. Before replacing rear pads, the workshop must identify the actuator type and complete the preparation specified in the service information, including service mode where required. Do not force the piston back without the correct procedure. Afterwards, check actuator operation, pedal feel and leaks. Pre-Replacement Checklist Bring the recent replacement history and describe your usual driving. Ask the workshop to record measurements and the reason for replacing each component on the job sheet. Obtain bedding instructions for the selected kit: a generic series of hard stops is not an appropriate substitute. ☐ Confirm the VIN, generation, engine and parking brake type. ☐ Describe noise, vibration, pulling and changes in pedal travel. ☐ Retain dashboard messages and investigate any stored faults. ☐ Inspect every pad and both working faces of each rotor. ☐ Record rotor thickness and the minimum for the exact component. ☐ For pulsation, measure runout and thickness variation, and check hubs. ☐ Check caliper movement, dust boots and pad seats. ☐ Confirm replacement part numbers and fitting hardware. ☐ Follow the parking brake procedure and check fastener tightening. ☐ Check braking after assembly and agree on bedding instructions. Mistakes to Avoid choosing a kit solely by the Altima name without its year and brake specification; replacing one pad or rotor instead of an axle set; judging all the brakes from one outer pad visible through the spokes; agreeing to resurfacing without checking permission and final thickness; forcing an electric parking brake mechanism’s piston back without preparation; replacing parts again without correcting the cause of vibration or binding. Important. Grinding, strong pull, a leak, smoke from a wheel or a clear loss of braking calls for a safe stop and workshop assistance. Follow the vehicle instructions for a red warning. Do not continue driving with faulty brakes or test them at speed. Conclusion The condition of the fitted components determines when Altima brakes need replacement. Inspect every pad, measure the rotors and investigate uneven wear. Account for the parking brake type when servicing the rear axle. Recorded thickness measurements help reveal changes and plan the next inspection. If you are choosing a used Nissan Altima, current listings can help you compare cars. Request the brake repair history, check for vibration and assess parking brake operation before buying. A wheel-off inspection provides a more complete assessment of pad and rotor condition.
For a Nissan Altima, the answer depends on the drivetrain and transmission. On a front-wheel-drive CVT model, the front differential sits inside the transmission and uses its fluid. There is no separate rear differential oil change. An Altima AWD has a rear differential and transfer unit that require separate servicing. Confirm the vehicle specification by VIN before booking the work. Identify the Service Your Altima Needs The Nissan maintenance reference lists a separate differential oil service for the 2024 Altima 2.5 AWD, while front-wheel-drive versions do not require that operation. This does not remove the need to maintain the CVT on an FWD car. The invoice should identify both the assembly being serviced and its fluid. This article focuses on CVT-equipped Altimas. Earlier cars with a different gearbox, a hybrid powertrain or replacement assemblies require their own checks. The model name, engine size and body shape cannot replace identification of the transmission code and drive type. What to Check on a Used Car Ask the workshop to confirm whether a rear differential and propeller shaft are present, then compare the installed assemblies with the VIN specification. An AWD badge or listing description may be inaccurate. A transmission-fluid invoice does not establish that the rear differential or transfer unit on an AWD car was serviced. Important. Do not put GL-5 gear oil into the CVT. These fluids have different operating properties. The absence of a separate front differential service on FWD does not mean that the CVT needs no inspection or maintenance. When to Change Oil on an Altima AWD The 2024 Altima owner’s manual specifies differential and transfer oil replacement for the 2.5 AWD under severe use every 20,000 miles, shown as 32,000 km, or 24 months, whichever comes first. The first operation appears on page 9-12. This is a specific schedule example; confirm applicability before using it for a different year or market. The standard schedule lists inspections. Inspection and replacement are different operations: an inspection record does not prove that the fluid was renewed. Do not apply the AWD interval to the CVT or assign one mileage to every Altima based on the model name alone. Account for Driving Conditions in the UAE Describe your actual use to the workshop, including hot-weather traffic, extended low-speed operation, repeated short trips and dusty roads. Those conditions and the vehicle’s service documents determine whether standard or severe maintenance applies. If its history is unknown, establish the condition of each assembly and what fluid was previously used. Flooding, an impact to a housing or a leak calls for an unscheduled inspection. Driving on a dusty road does not itself prove that sand entered a sound assembly, while a clean transmission casing does not confirm a correct fluid level. Symptoms That Need Diagnosis Oil protects gears and bearings against wear. Fluid loss or water contamination weakens that protection. However, noise near the driven wheels does not always come from a differential. Tyres, wheel bearings and other drivetrain components can produce similar complaints. When a Fluid Change Is Not Enough • A hum persists or becomes louder after warm-up. • Knocking, grinding or pronounced vibration develops. • An AWD car shudders in turns or displays a drivetrain warning. • Oil traces return after a repair. Fresh fluid cannot restore damaged gears or bearings. CVT judder also needs its own diagnosis. If a workshop proposes a rear differential oil change on an FWD car, ask which assembly it intends to service. Stop driving if there is severe grinding or a significant fluid leak, and arrange transport to a workshop. Choose the Fluid and Check the Service The following requirements come from page 10-3 of the same 2024 Altima manual. Use them only after checking the year, market and installed transmission. Earlier generations require separate specification checks. A generic transmission-oil label is insufficient for selecting a product. Check its full name and suitability for the actual assembly. Do not select a thicker oil simply because the weather is hot, or add a noise-reducing additive before identifying the fault. Note. The drained volume does not establish the correct refill amount because fluid may already have leaked out. The assembly’s service procedure determines the level, checking temperature and filling method. A CVT fluid change does not renew AWD rear differential oil. Post-Service Checklist ☐ The invoice identifies the assembly that was serviced. ☐ The product, specification and actual quantity used are recorded. ☐ The cause of any detected leak has been identified and repaired. ☐ Plug seals match the application and repair procedure. ☐ Fluid level, leak tightness and the original complaint have been checked. ☐ The date, mileage and next service deadline are recorded. When browsing current listings for a Nissan Altima, confirm the drive type and ask for transmission service records. For AWD, look for separate entries covering the rear differential and transfer unit. Recently changed oil alone does not establish the car’s mechanical condition. Conclusion On a CVT-equipped Altima FWD, the front differential is serviced with the transmission. AWD adds a rear differential and transfer unit to the maintenance plan. Select intervals and fluids from the documents for the actual car, and start with diagnosis if there is a leak, noise or suspected water entry.
A front-wheel-drive Nissan Altima has no transfer unit sending power to the rear axle, so it does not need a transfer case oil change. Nissan Middle East’s current specifications list regional Altima versions with front-wheel drive, or FWD. Transfer case servicing applies to all-wheel-drive vehicles, whose AWD specification must be confirmed separately. On a used car, the model name alone is not enough. Check the VIN, model year and drivetrain before approving work. This article explains whether the operation applies to your car, how to select oil for an AWD transfer unit and what to ask the workshop to record. Key point. Confirm FWD or AWD first. A front-wheel-drive Altima does not need transfer case oil replacement; an all-wheel-drive version has its own maintenance requirements. Identify the Altima drivetrain first Start with factory information linked to the VIN and the vehicle documents. A trim badge, a 2.5-litre engine or the Xtronic name does not establish all-wheel drive. If the seller’s description conflicts with the service database, ask a workshop to inspect the drivetrain on a lift and compare the fitted units with the factory specification. FWD means front-wheel drive. There is no separate transfer unit sending power rearwards. Query any transfer case oil line on the estimate: the workshop may have used a generic template or labelled another unit incorrectly. AWD means all-wheel drive. The drivetrain includes a unit that transfers power towards the rear axle. Check its maintenance requirements against documentation for that version and model year. Drivetrain not yet confirmed. Wait for identification before buying oil. A body badge and a listing description do not replace checking the actual vehicle. Why a CVT fluid change does not cover this service The CVT, AWD transfer unit and rear differential are separate maintenance items. A record stating that transmission oil was changed does not identify which were serviced. Ask for each unit and product to be named. A front-wheel-drive Altima follows its own gearbox schedule, without adding a transfer case it does not have. When to arrange an unscheduled inspection Humming, vibration or jerking does not prove a transfer case fault. Note the speed, vehicle temperature and conditions when a symptom appears. On an AWD car, also report dashboard warnings, recent tyre replacement and deep-water exposure. Diagnosis must account for the drivetrain actually fitted. Fresh oil underneath. Identify the source first; a nearby unit may be leaking. Then check the level and cause in the affected component. A hum that changes with road speed. Check tyres and wheel bearings as well as the drivetrain. Changing oil before locating the noise may not resolve it. Vibration or jerking. Inspect tyres, driveshafts, mounts and gearbox operation; on AWD cars, include the components transmitting power rearwards. An AWD warning or underbody damage. Follow the dashboard and owner’s manual instructions. After an impact or water exposure, arrange an inspection before further driving. Important. An AWD warning is not an instruction simply to change the oil. With severe vibration, significant leakage or difficulty moving, stop safely and arrange a diagnosis. Choosing oil for an AWD transfer unit The 2023 Altima owner’s manual lists Genuine NISSAN Differential Oil Hypoid Super GL-5 80W-90 or an equivalent conventional, non-synthetic oil under Transfer oil. This is a requirement for the AWD version covered by that document. Confirm that the manual applies to your vehicle before using it. Source: 2023 Nissan Altima owner’s manual, page 10-3. The table does not set a schedule for every Altima or apply to a transfer unit absent on FWD cars. When inspection or replacement is due For FWD, this operation does not apply. For AWD, find the transfer case oil entry in the service schedule for your car. Establish whether it calls for inspection or replacement and check both mileage and time limits. A routine service interval does not automatically mean changing every fluid. The schedule must match the model year, specification and operating conditions. Describe daily traffic, extended low-speed use and dusty routes to the workshop. Ask which conditions affect maintenance of this particular unit, and have the next inspection recorded. If the AWD service history is unknown, start with an inspection and document check. Contamination, a leak or a repaired unit calls for a decision based on the findings. Do not wait for a convenient mileage milestone when a problem has already been identified. Agree the work with the workshop The estimate should name the unit, oil specification and service refill quantity. A thicker oil is not automatically suitable because the weather is hot. Do not carry over fluid or procedures from a Patrol, X-Trail or another Altima generation without confirming applicability. Verify the level using the procedure for the fitted unit. The drained quantity does not replace a level check, particularly after a leak. Dry capacity can differ from a routine service refill. Agree any required plug seals and the correct tightening torques. Include flushing or additives only when there is a technical basis for their use. After servicing, check for leaks and assess vehicle behaviour. If software operations are included, ask what they do and where they are required in the documentation for that Altima. Check the result and the invoice Owner’s checklist ☐ Record the VIN, model year and exact specification. ☐ Confirm FWD or AWD using factory information. ☐ For FWD, query and remove an incorrect transfer case service. ☐ For AWD, find the schedule for the fitted unit. ☐ Agree the oil specification, refill quantity and seals. ☐ Report leaks, noise, warnings and recent tyre replacement. ☐ Check that the CVT and transfer unit are listed separately. ☐ Obtain the date, mileage and a record of the actual work. ☐ Record the next AWD inspection or replacement due. Common mistakes Booking a transfer case oil change for a front-wheel-drive Altima. Using CVT fluid instead of the oil specified for the AWD transfer unit. Selecting oil by viscosity alone and overlooking other requirements. Copying service intervals and operations from another Nissan without checking. Conclusion For the Nissan Altima, identify the drivetrain first. FWD cars do not need this operation; AWD cars require the correct documentation, oil and a separate service record. If there is noise, leakage or a system warning, establish the cause first. This helps you agree an appropriate scope of work. When browsing current offers for the Nissan Altima, compare verified specifications and service history. Establishing whether a car is FWD or AWD before purchase prevents confusion about future maintenance costs.
Listings for Nissan Altima may include these trims: XE, XL, XL-TLS, and XL-Upr, among others. The current selection depends on the selected country, model year, and vehicle availability. Use the “Trim” filter to compare the available options.
Mileage should be assessed together with the vehicle’s age, condition, and service history. Compare the mileage with similar vehicles of the same model year, and check the service history and actual condition of the vehicle before buying.
Current Nissan Altima listings on AUTO.AE are priced from 6,500 to 119,381 AED. The price depends on the model year, mileage, trim, condition, and regional specifications. These figures are based on active listings and may change.
A private seller may offer a lower price, while a showroom may provide additional services, such as financing, a warranty, or help with insurance. Terms vary, so check the information in the listing, the vehicle documents, and the seller’s details.
Check the vehicle registration card (Mulkiya), the VIN on the vehicle and in the documents, the owner’s details, the service history, and accident records. Also check for any outstanding loan, fines, or other restrictions. It is advisable to arrange an independent inspection before completing the purchase.
Yes. You can arrange an independent technical inspection with the seller at a service centre of your choice. The inspection can help assess the condition of the engine, transmission, bodywork, electronics, and other components.
GCC Specs means that the vehicle was manufactured to specifications for Gulf Cooperation Council markets. These versions are generally designed for local climate conditions. However, GCC Specs alone does not confirm the vehicle’s condition or mean that it has a valid warranty; these points should be checked separately.
Some showrooms offer financing. If available, the terms or an estimated monthly payment may be shown in the listing. The final interest rate and approval depend on the bank, the down payment, and the buyer’s details.
