Lancia Aurelia B20 GT Coupe Series I by Pinin Farina, 1951
Lancia Aurelia
Lancia Aurelia•
•45 просмотров
Chassis No.: B20-1346
Engine No.: B20-1345
Registration: UK V5C
Location: London, United Kingdom
£173,600 GBP | Sold
- Special body by Carrozzeria Pinin Farina
- Reportedly displayed at the 1952 Paris Salon
- Features many special interior and exterior details
- Eligible for numerous events, including the Mille Miglia
75 bhp, 1,991 cc SOHC V-6 engine with two Zenith Stromberg carburettors, four-speed manual transaxle, independent front sliding-pillar suspension, rear suspension with multi-link semi-trailing arms and coil springs, and four-wheel drum brakes. Wheelbase: 2,660 mm
Introduced in berlina form in 1950, Lancia’s Aurelia was a landmark post-war automobile. The first production car with a V-6 engine, and the first shod with radial tyres, the Aurelia combined Lancia’s traditional unit body construction and sliding pillar front suspension with a rear transaxle and sophisticated, multi-link rear suspension. In addition to the standard pillarless four-door B10 body, Lancia offered a B50 coachbuilder’s platform, with the same 1,754-cubic centimetre engine on the same 2,860-millimetre wheelbase that formed the basis for speciale Aurelias from numerous design houses.
Nineteen fifty-one saw the introduction of the B20 Gran Turismo, with a 1,991-cubic centimetre engine on a shorter 2,660-millimetre wheelbase. Nearly all 500 of the Series I B20s received the standard Vittorio Jano-designed GT body. The car offered here, chassis number B20-1346, is a rare example of a speciale design by Pinin Farina on the Series I platform. Although it shares many visual characteristics of the standard production Aurelias, this car features rare original leather upholstery, a dashboard layout similar to later-series B20s, and nonstandard bumpers. Its distinctive two-colour paint is elegantly delineated by a narrow moulding that runs along the beltline and down and around the boot and back.
Chassis number B20-1346 was completed and invoiced on 14 December 1951, and it is reported by the French Lancia Club to have been on the Pinin Farina stand at the 1952 Paris Salon, though that claim currently remains unconfirmed. This would, however, explain the car’s unusual French fittings, such as Marchal lights and battery cutout switch, Jaeger gauges, and French-made Zenith Stromberg carbs.
Over the course of the past several years, B20-1346 has received extensive attention. The car received a new clutch plate, rear brake cylinders were re-sleeved, third gear was replaced, and the charging system was converted to an alternator built within a dynamo housing (the original dynamo and voltage regulator remain with the car). The car also received new track rod ends, a new steering coupler, a new fuel tank, and a new speedometer cable.
In 2010, the body was taken to bare metal and received a glass-out repaint in its original colours of black over amaranto. Recently, United Kingdom Lancia specialists Omicron replaced the rear wheel bearings, refreshed the gear linkage, rebuilt the carburettors, and rebuilt the lower half of the engine, including a new cylinder liner, re-metaling the bearings, and replacing the crankshaft, after which the assembly was balanced.
This B20 Speciale is indeed a special and rare automobile, with wonderful coachwork and superb chassis engineering, making it suitable for any gentleman or lady’s fine collection, as well as numerous vintage driving events, including the historic Mille Miglia.
Стоимость
853 902 AED
