Be the first to know about new ads
Save your ad search filters, and find the ads you need faster.
1 - 8 ads
out of 8
Toyota Hilux price starts from AED 31,500 and goes up to AED 668,395. Final on-road price may vary slightly based on insurance, registration, and optional accessories.
Toyota Hilux Pickup double cab
Best place to buy
Toyota Hilux Pickup single cab
Best place to buy
Toyota Hilux Pickup truck one and a half cab
Best place to buy
Toyota Hilux Automatic
Best place to buy
Toyota Hilux Manual
Best place to buy
Toyota Hilux Diesel
Best place to buy
Toyota Hilux Petrol
Best place to buy
Toyota Hilux 2026
Best place to buy
Toyota Hilux 2025
Best place to buy
Toyota Hilux 2024
Best place to buy
Toyota Hilux 2023
Best place to buy
Toyota Hilux 2022
Best place to buy
Toyota Hilux 2021
Best place to buy
Toyota Hilux 2020
Best place to buy
Toyota Hilux 2019
Best place to buy
Toyota Hilux 2018
Best place to buy
Toyota Hilux 2017
Best place to buy
Toyota Hilux 2016
Best place to buy
Toyota Hilux 2015
Best place to buy
Toyota Hilux 2014
Best place to buy
Toyota Hilux 2013
Best place to buy
Toyota Hilux 2012
Best place to buy
Toyota Hilux 2010
Best place to buy
Toyota Hilux 2009
Best place to buy
Toyota Hilux 2008
Best place to buy
Toyota Hilux 2007
Best place to buy
Toyota Hilux 2005
Best place to buy
Toyota Hilux Dubai
Best place to buy
Toyota Hilux Abu Dhabi
Best place to buy
Toyota Hilux Sharjah
Best place to buy
Toyota Hilux Riyadh
Best place to buy
Toyota Hilux Al Buraymī
Best place to buy
Toyota Hilux Muscat
Best place to buy
Toyota Hilux Barkā’
Best place to buy
Toyota Hilux Al Jubayl
Best place to buy
Toyota Hilux Ajman
Best place to buy
Toyota Hilux Dammam
Best place to buy
Toyota Hilux Jeddah
Best place to buy
Toyota Hilux Medina
Best place to buy
Toyota Hilux Al Mubarraz
Best place to buy
The chart shows the dynamics of the model's average price on the used market over the past year. This data helps you assess whether the purchase is attractive and forecast the car's future value.
Prices on AUTO.AE may differ from the actual selling price. Data is based on our database of sold vehicles and current listings. For an accurate estimate, use our tool.
A Toyota Hilux does not have one mileage at which its brake pads and rotors must automatically be replaced. A pickup driven empty on open roads places a very different demand on its brakes from one carrying tools, towing a trailer or crossing sand. Use the scheduled inspections as checkpoints, then base the replacement decision on measurements and the way the vehicle behaves under braking. Key rule. Do not schedule replacement from the odometer alone. The maintenance plan sets inspection points; measured wear and mechanical condition determine the repair. 4 signs that a Toyota Hilux brake system needs attention One symptom rarely identifies one failed part. Noise can come from a wear indicator, sand or restricted hardware, while vibration may begin at the hub, wheel or suspension. Record when the problem occurs and examine the front disc brakes and rear brake assemblies as one system before ordering parts. Metallic squeal or scraping. A steady high note that follows wheel rotation may be the wear indicator approaching the rotor. Coarse grinding is more serious because the usable lining may already be gone. Stop routine use and inspect the rotor, pads and caliper. Pedal pulsation or steering shake. Vibration that returns during ordinary braking calls for rotor-runout and thickness checks. The hub face, wheel fastening and suspension should be assessed at the same time. Brief ABS feedback during an emergency stop is a separate condition. The pickup moves sideways under braking. Unequal force can come from a restricted caliper, contaminated lining, leaking rear wheel cylinder, uneven drum adjustment, tyres or suspension. Compare the left and right sides instead of replacing the first worn part found. More pedal travel with weaker deceleration. A longer or softer pedal, hot-brake smell, or the need for markedly more pressure requires prompt diagnosis. Fluid condition, leaks, the booster and electronic controls must be checked as well as the friction components. Why postponing brake service can become expensive and unsafe A Hilux is designed to carry payload and tow, so its working mass can vary far more than that of an ordinary passenger car. Extra mass and speed mean extra heat at the brakes. The reduction in reserve may be gradual, but driving past a wear limit can damage several components in a short time. Heat builds sooner. Thin lining and incomplete surface contact distribute energy poorly. During repeated loaded stops, temperature rises faster and the pedal response may change from one application to the next. The front rotor becomes deeply scored. Once the friction layer has disappeared, the pad backing cuts into the working face. A repair that could have required pads alone may then also require two rotors. A rear drum runs hot. A sticking wheel cylinder, seized cable or incorrect adjustment may prevent the shoes from releasing. Heat damages the linings, affects nearby grease and can produce odour or smoke. Braking stability deteriorates. A left-to-right force difference becomes more apparent on dusty surfaces, with payload or during a manoeuvre. Replacing one visibly worn component cannot restore correct balance. Secondary costs rise. A dragging brake loads the tyre, hub and driveline, increases rolling resistance and wastes fuel. New friction parts will wear again if the original mechanical fault remains. Toyota guidance for the Hilux brake system Toyota owner information treats wear-indicator noise as a prompt to inspect the pads without delay. If the friction layer is allowed to disappear, the backing plate can score the rotor and more pedal effort may be needed to stop. Rear drum assemblies need their own inspection because their shoe condition cannot be judged from the visible front brakes. Important: a service interval tells you when to check the system; it does not promise how long a friction part will last. A proper assessment records pad and shoe material, front-rotor thickness and runout, rear-drum diameter, cylinder condition, adjuster operation and free caliper movement. How to select brake parts for a Toyota Hilux Hilux is offered as Single Cab, Extra Cab and Double Cab models with different engines, drivetrains and load ratings. Brake equipment can therefore change with generation, model year and destination market. A similar pad outline or a matching model name is not sufficient evidence of fitment; start with the VIN. Exact VIN-matched number. More than one brake package can appear within a generation. Verify the front axle, rear drum and parking-brake components separately. Suitable friction compound. The lining must retain stable friction when hot and remain compatible with its mating surface. An unknown, overly aggressive material can add noise and shorten rotor or drum life. Front-rotor dimensions. Confirm diameter, original and minimum thickness, overall height, ventilation and mounting pattern. Visual similarity does not establish safe compatibility. Matched work across one axle. Fit front pads as a complete axle set. Measure and compare both rotors; if either has passed its limit or cannot be corrected, service the pair symmetrically. Rear drums and parking-brake hardware. Many Hilux configurations use rear drum brakes. Inspect the shoes, drums, wheel cylinders, springs, adjusters and cables together, and confirm the exact layout of the vehicle by VIN. The body style, generation and production years can first be narrowed down in the Toyota Hilux catalogue. Use that step for orientation only; confirm front pads, rotors, rear shoes and fitting kits against the VIN before purchase. Why can a Hilux squeal, shake or brake unevenly? Noise or judder immediately after a repair does not prove that the replacement parts are defective. Debris between the rotor and hub can create runout, while misplaced shims, restricted hardware or patchy material transfer can produce noise. Diagnose the source rather than treating the symptom alone. How payload, sand and heat change brake wear Pickup use often combines high ambient temperature, dust and a changing vehicle mass. There is no single shortened replacement interval for hot climates, but a loaded run, dune trip or long descent should be followed by attention to smell, noise, braking balance and unusual temperature differences between wheels. Payload in the bed. Tools, cargo and passengers increase the energy that must be removed at every stop. Plan for the actual operating mass and leave a larger distance margin. Towing and downhill travel. Select an appropriate gear before the descent and use engine braking. Holding the pedal continuously prevents useful cooling between brake applications. Dusty and off-road routes. Sand can contaminate sliding hardware and reach working surfaces. After demanding terrain, inspect dust boots, listen for new noise and confirm that no wheel is dragging. Sudden cooling with water. Do not direct cold water at very hot rotors or drums immediately after heavy use. Allow the assemblies to lose heat gradually. Humidity during long parking. Light surface rust often clears after a few controlled stops. Deep corrosion, persistent noise or newly developed pulsation needs inspection. Practical brake inspection and replacement checklist Write down when the symptom occurs. Note speed, payload, brake temperature, steering position and the exact point at which noise or pulling begins. This evidence makes diagnosis faster. Compare both sides of the front axle. Inspect the inner pads as well as the outer pads rather than relying on a view through a wheel spoke. A large difference suggests restricted piston or slide movement. Open the rear drums for inspection. Check shoe material, contact pattern, drum inside diameter, wheel-cylinder dryness, spring condition and adjuster operation. Ask for measured results on the repair order. Useful records include lining remaining, rotor thickness and runout, drum diameter and the correct limits for that version. A verbal estimate is not a measurement. Remove the cause of uneven wear. Before new consumables are fitted, restore free caliper travel, clean the hub, repair any wheel cylinder or cable fault and inspect protective boots. Bed new components in correctly. Follow the parts maker's procedure, avoid unnecessary emergency-level stops and do not hold very hot pads against one spot while stationary. Road safety takes priority throughout. Assess the brakes on a pre-owned pickup. Before purchase, check the remaining friction material, rotor and drum condition, braking balance and signs of overheating. An objective assessment requires a lift inspection, measurements and a safe road test. Common Hilux brake-service mistakes Replacing front pads while ignoring the rear axle. The visible front brakes may appear healthy while rear shoes are worn, fluid-contaminated or incorrectly adjusted. Both systems belong in the same inspection. Ordering parts from model year alone. The same year can include different cabins, engines and market specifications. A mismatch in shape or thickness is often discovered only during installation. Fitting pads to an unchecked rotor. Scoring, excessive runout and sub-limit thickness do not disappear with fresh lining. The new pads may quickly develop a poor contact pattern. Servicing only one side. Different friction characteristics on one axle create unequal force. Replace the set left-to-right and correct the associated fault before reassembly. Treating a soft pedal as ordinary pad wear. Air, a leak, overheated fluid, poor drum adjustment or a booster fault may be responsible. Do not postpone this symptom until the next scheduled visit. Conclusion Replace Toyota Hilux brake pads and rotors according to inspection results, not an average mileage. Payload, trailers, sand, frequent stops and long descents justify closer monitoring. Grinding, pulling, pulsation or a clear loss of braking performance requires diagnosis before normal driving continues. Service front components evenly across the axle and assess the rear drum mechanisms separately.
For a Toyota Hilux in normal service, the differential oil is inspected at 20,000 km and replaced at 40,000 km. On four-wheel-drive models, the front housing takes a reference 1.45 or 1.60 L, while the rear takes 3.60 to 3.75 L. Regular heavy-load operation brings the replacement interval forward to 20,000 km or 24 months. Key distinction. A rear-wheel-drive Hilux has no front differential oil service. A 4WD driveline adds a front differential whose capacity changes with the A.D.D. system. The transfer case uses a separate lubricant and service procedure. A rear differential lock changes the fill quantity, although the owner’s manual lists the same differential-oil specification for the configurations covered here. Signs That a Toyota Hilux Differential Needs Attention The Hilux axles have no dipstick, and the instrument panel does not track gear-oil condition. A workshop checks the level at the fill opening, looks for leakage, and examines the drained oil. Working conditions matter on a pickup: 20,000 km of light road use does not place the same demand on the gears as the same distance with cargo or a trailer. The scheduled checkpoint is due. Inspect the oil at 20,000 km and replace it at 40,000 km. If previous service cannot be confirmed, examine both housings before the truck returns to demanding work. Dark colour alone is not a failure sign, but burnt odour, water, or clearly visible debris warrants further investigation. The driveline sounds different after off-road use. A road-speed-related hum can come from the ring-and-pinion set or its bearings. Aggressive tyres, universal joints, and wheel hubs may sound similar. Compare the noise under acceleration, steady load, and overrun before attributing it to one axle. Fresh oil is visible on the axle housing. Possible leak points include the drain and fill plugs, axle-shaft seals, and pinion seal. Dust can hide the origin, so clean the casing before judging the rate of loss. Even a slow leak matters when the truck carries weight because upper components receive less splash lubrication as the level falls. The drained oil looks like an emulsion. A pale, cloudy mixture usually contains water. It may enter through the breather during a crossing, through damaged vent plumbing, or during pressure washing around the axle. A top-up leaves the contamination inside. Correct the entry route, renew the full charge, and check for corrosion. The magnetic plug carries coarse debris. A thin coating of grey paste is consistent with gradual wear. Sharp fragments, needle-like swarf, or bright flakes call for closer examination of the teeth and bearings. Clean oil removes suspended material but cannot restore a scored surface or a displaced contact pattern. When the Oil Should Be Changed Earlier Toyota’s severe-use schedule calls for front and rear differential oil replacement every 20,000 km or 24 months on a heavily loaded vehicle. Examples include frequent operation with substantial cargo or a trailer. The same interval applies after repeated driving for more than two hours at 80 per cent or more of the vehicle’s maximum speed. Inspect the oil promptly after a deep water crossing rather than waiting for the next mileage point. Sand driving at reduced tyre pressure, extended low-range work, and long climbs also generate heat. These conditions do not rewrite the published schedule by themselves, but they justify closer checks of breathers, plugs, seals, and fluid condition. What Old Differential Oil Can Do to a Toyota Hilux The hypoid gears carry high contact pressure while their tooth surfaces both roll and slide. GL-5 oil maintains a separating film and transfers heat away from the mesh. As the lubricant ages, its additive reserve falls and fine wear metal remains suspended. Deterioration is usually progressive and may first become apparent only when the truck is loaded. Film strength declines. Sustained heat makes the lubricant less effective at the tooth contact. The truck may feel normal when empty, yet the protection margin can already be reduced during towing, hill work, or operation on soft ground. The axle runs hotter. Contaminated oil carries heat away from gears and bearings less efficiently. Long climbs, high resistance in sand or mud, and repeated transitions between drive and engine braking create particularly demanding conditions. Gear alignment shifts under load. Bearing wear increases clearance and moves the contact patch. Pitting, scoring, or spalling can then develop on the working faces. At this stage an oil change can expose the wear particles, but it cannot remove the mechanical cause. Seals and the locking hardware age more quickly. Excess temperature hardens sealing lips and increases the chance of leakage. Debris around the locking assembly may interfere with operation. Substituting an unapproved viscosity is not a repair for either symptom. Routine service turns into an axle repair. Continued use with insufficient oil, water, or large metal fragments can damage the gear set, bearings, and casing. The remedy may involve bearing-preload and contact-pattern adjustment, individual component replacement, or a complete differential assembly. Important. Do not mask a whine with a thicker oil or an arbitrary additive. The sound may soften while the underlying wear continues, and cold-start circulation can become worse. If noise rises suddenly or is joined by vibration, leakage, or unusual heat, stop heavy-load operation until the driveline has been diagnosed. Toyota Hilux Differential Oil Specification and Capacities For the Hilux generation covered by this manual, Toyota specifies Toyota Genuine Differential Gear Oil LT 75W-85, API GL-5, or an equivalent product. The same specification applies to the listed front and rear arrangements, including the rear locking version. Capacity depends on A.D.D. at the front and on the locking equipment and production origin at the rear. A.D.D. means automatic disconnecting differential. The figures are reference quantities; set the final level by the owner’s-manual procedure. Rear capacity without a differential lock differs between vehicles produced in Thailand and South Africa, so identify the specific truck before starting work. Official Differential Oil Service Schedule In normal operation, inspect the front differential on 4WD models and the rear differential at 20,000 km, replace the oil at 40,000 km, inspect again at 60,000 km, and replace it again at 80,000 km. The pattern then repeats. The time limits are 12 months for inspection and 48 months for replacement when time is reached before mileage. Front differential entries do not apply to a rear-wheel-drive Hilux. For regular heavy loading or prolonged driving close to maximum speed, Toyota shortens replacement to 20,000 km or 24 months. Water contamination, leakage, or coarse wear debris requires action regardless of the odometer. A Safe Differential Oil Change Procedure Identify the driveline configuration first. Before buying oil, confirm two- or four-wheel drive, A.D.D. equipment, the rear differential lock, and the vehicle’s production origin. This prevents an incorrect fill quantity and avoids confusing axle oil with the separate transfer-case lubricant. Loosen the fill plug before draining. Restore access first if the plug is seized or its threads are damaged. Otherwise the housing may be emptied before there is a reliable way to refill it, leaving the truck unsafe to move under its own power. Keep the pickup level and drain the oil while warm into a clean container. A level stance is needed to set the fluid correctly at the fill opening. Assess odour, cloudiness, and sediment separately, then clean the magnetic plug so the size and shape of any particles can be seen. Refill with an approved LT 75W-85 GL-5 product. Renew the sealing washers, clean the seating surfaces, and tighten the plugs to the repair specification. Treat the table quantity as preparation guidance; the correct final level comes from the procedure for the actual differential. Inspect the axle again after a short drive. There should be no fresh oil around the plugs, axle seals, or pinion seal. Record the mileage, actual quantity, and product used on the service order so the next inspection is based on a clear record rather than memory. The generation, engine, and cab style can be cross-checked in the Toyota Hilux catalog. The front differential design and rear locking equipment must still be verified on the vehicle before deciding the oil quantity. Why a High Mileage Toyota Hilux May Develop Axle Whine Differential whine comes from repeating vibration in the gears or bearings. Low oil can make it more prominent, but the noise alone does not prove that a fluid change will cure it. On a pickup, also rule out all-terrain tyres, propeller shafts, wheel hubs, and components mounted beneath the cargo bed. The noise grows under acceleration. Examine the loaded faces of the pinion and ring gear, the pinion bearing, and bearing preload. If the whine followed previous axle work, check the adjustment and contact pattern before trying another oil brand. The tone becomes clearer on overrun. Engine braking transfers force to the opposite tooth faces. A repeatable change between drive and coast can indicate excessive backlash, bearing wear, or incorrect gear alignment. Cornering changes the volume. Check tyre behaviour and wheel bearings before condemning the differential. Jerking during a slow turn is not automatically an oil problem. On a Hilux with a selectable rear locker, first confirm that the mechanism has fully disengaged. A vibration appears with the noise. Inspect universal joints, propeller-shaft splines, the centre bearing where fitted, mountings, and wheels. Vibration often leads to another part of the driveline, so an axle-oil change should not replace source diagnosis. The symptom began after a crossing or a known leak. Check level and clarity first. An emulsion weakens the oil film and starts corrosion, while a low charge disrupts splash lubrication inside the housing. Avoid towing or difficult terrain until the inspection is complete. Checks to Complete Before Authorising an Axle Repair Begin with tyre pressures and wear patterns, wheel-hub play, and propeller-shaft joints. Clean the housings, locate any fresh leakage, and listen to the front and rear units through different load states. Examine the drained oil separately; water and coarse metal fragments reveal more than dark colour on its own. After service, repeat the road test on the same route. If the characteristic whine remains, progressively thicker lubricants will not solve it. Measure backlash, check bearing preload, and inspect the gear contact pattern. Early diagnosis may limit the work to a seal or one bearing before the gear set is damaged. Conclusion For a Toyota Hilux, the normal baseline is differential-oil inspection every 20,000 km and replacement every 40,000 km. Heavy-load operation shortens replacement to 20,000 km or 24 months. The 4WD front housing takes 1.45–1.60 L and the rear 3.60–3.75 L. Inspect sooner after water entry, leakage, or the onset of axle whine.
A transfer case is fitted only to four-wheel-drive Toyota Hilux models. For those vehicles, 40,000 km or 48 months is a useful baseline inspection point: check the oil, confirm the level, and replace it when its condition requires. Water crossings, repeated towing, operation near maximum payload, or any sign of leakage justify an earlier inspection. English Toyota documentation for the eighth-generation Hilux lists a reference capacity of about 1.0 L and Toyota Genuine Transfer Gear Oil LF with SAE 75W viscosity. Earlier vehicles may call for API GL-4 or GL-5 SAE 75W-90. The correct container therefore depends on the VIN, production year, drivetrain, and vehicle-specific manual rather than the Hilux name alone. Key point. Confirm that the Hilux is a four-wheel-drive model before planning this service. Toyota specifies Transfer Gear Oil LF SAE 75W for the GUN series, while earlier KUN models may require 75W-90. A similar capacity of about 1.0 L does not make the specifications identical. When Does a Toyota Hilux Transfer Case Need an Unscheduled Check? A Hilux may spend much of its life carrying equipment, towing, travelling on unsealed roads, or moving slowly while transmitting high torque. Those duties do not rewrite Toyota’s oil specification, but they make leaks, level loss, and fluid contamination more consequential. The scheduled inspection point has arrived. Inspect the transfer case if 40,000 km or four years have passed since the last documented check. Where no record exists, establishing a verified baseline is more dependable than relying on a seller’s recollection. Oil residue is visible on the skid plate or housing. Look around both plugs, the case joint, the breather, and the output-shaft seals. Dust clings to fresh oil, so a damp, dark patch may reveal a slow leak before drops appear beneath the pickup. The vehicle has crossed water or deep mud. Moisture can enter through a breather or compromised seal. Pale emulsion, foam, or cloudy oil calls for a complete oil change and investigation of the entry path. The sound or 4WD engagement has changed. A load-related hum, a knock as torque reverses, reluctant selection of 4H or 4L, or a flashing four-wheel-drive indicator needs diagnosis. The source may be the transfer case, shift actuator, propeller shafts, differentials, or electrical system. The previous operating conditions are unknown. After buying a used Hilux, confirm whether it was built as a 4WD model, identify its model code, and establish what oil was used. Similar-looking pickups can have different driveline layouts and service requirements. Why Payload, Towing, and Sand Increase Oil Stress At high gross weight, on loose sand, or with a trailer, the transfer case transmits substantial torque for longer periods. Low road speed reduces airflow, while frequent low-range use adds heat. Hot weather intensifies the workload, but it is not permission to substitute a thicker oil. After dry off-road travel, clean the underbody, inspect the case, and make sure the breather is not obstructed. Water immersion deserves a different response: check the unit without waiting for scheduled service. Milky oil or a changed level requires more than topping up; correct the cause and renew the fluid. What Can Happen When Hilux Transfer Case Oil Is Neglected? Odometer distance is only one part of the risk. A sealed unit with clean oil operates very differently from a case running low or containing water. Fluid loss, an unsuitable product, and prolonged high-load operation accelerate damage most quickly. The lubricating film weakens first. Heat, moisture, and wear material change the oil’s behaviour. Separation between moving surfaces becomes less reliable, and heat removal from gears, bearings, and the chain mechanism deteriorates. Operating temperature and noise then rise. A low level leaves some components with inadequate lubrication. The hum may be audible only during acceleration, climbing, or loaded driving, so silence at no load does not prove the unit is healthy. Wear develops into backlash and impact. Bearings, gears, and the chain experience greater shock loading. Vibration, whine, and a knock during the transition between drive and overrun can follow. Four-wheel-drive engagement may become inconsistent. If 4H or 4L does not engage predictably, inspect both the mechanical assembly and its controls. New oil cannot repair a failed actuator, sensor, or damaged wiring. Severe damage can require a strip-down. A failed bearing, stretched chain, or damaged gear teeth can interrupt torque delivery and harm adjacent parts. The repair scope can only be set after inspection. Important. Fresh oil cannot correct a mechanical fault. If hum, vibration, knocking, or 4WD engagement problems remain after service, inspect the bearings, gears, chain, propeller shafts, differentials, and shift mechanism. Toyota Guidance for Hilux Transfer Case Oil In the general maintenance schedule for a four-wheel-drive Hilux, transfer oil is an inspection item that is corrected or replaced as necessary. The English Toyota Australia Hilux manual covers model codes GUN12#, GUN13#, and TGN121R and provides the relevant specifications for that vehicle range. Source: Toyota Australia Hilux Owner’s Manual (Dec 2017–Jun 2018). Check the current manual for the individual model and year on toyota.ae or with an authorised Toyota dealer. How to Apply the 40,000 km / 48-Month Baseline to a Working Pickup Use whichever limit arrives first. A Hilux that covers 40,000 km in two years reaches the mileage point first; a lightly used pickup still reaches the time point after four years. Some regional service plans prescribe replacement rather than inspection, and the plan applicable to the individual vehicle takes precedence. A shorter preventive interval can be sensible for continuous towing, frequent sand driving, repeated water crossings, or unknown maintenance history. It remains an owner or workshop strategy, not a single mandatory Toyota replacement interval for every Hilux worldwide. How Hilux Generation Affects Oil Selection For Hilux models produced from 2015, the English manual specifies Toyota Genuine Transfer Gear Oil LF or an equivalent SAE 75W product, with a reference capacity of about 1.0 L. Earlier KUN-series documentation may specify API GL-4 or GL-5 SAE 75W-90 at a similar capacity. These instructions belong to different transfer-case versions and do not make the fluids automatically interchangeable. Do not use Toyota ATF WS. That fluid serves the automatic transmission. A four-wheel-drive Hilux transfer case has its own lubricant requirement. Confirm that the pickup is 4WD first. A rear-wheel-drive Hilux has no transfer case. Misidentifying the drivetrain leads to incorrect parts, fluid quantities, and service work. Do not buy oil from viscosity numbers alone. The markings 75W and 75W-90 do not fully describe additive chemistry or compliance with Toyota’s requirement. Look for the specified approval or documented equivalence. Do not force exactly 1.0 L into the case. The capacity is a reference value. Set the final level with the vehicle correctly positioned and follow the manual procedure, allowing for the amount of old oil that actually drained. What Can the Oil and the Hilux’s Behaviour Reveal? The transfer case is not the only source of driveline noise. Before assigning a fault, verify the oil level and condition, localise the sound, and inspect the propeller shafts, front differential, wheel bearings, and 4WD engagement mechanism. Practical Service Checklist ☐ Confirm that the vehicle is 4WD and record the VIN, model year, and model code. ☐ Locate the English owner’s manual for this exact Hilux version. ☐ Review previous service records and identify the product already in the unit. ☐ Inspect the skid plate, case, both plugs, breather, seals, and propeller-shaft areas. ☐ Make sure the fill plug can be removed before opening the drain plug. ☐ Examine the drained oil and plug magnet; investigate water or large metal fragments. ☐ Use the specified lubricant and install new sealing washers. ☐ Apply the manual’s tightening torque and set the level with the pickup correctly positioned. ☐ Check for leaks and verify 4WD operation safely, then keep a record of the service. Mistakes to Avoid Assuming every Hilux has a transfer case. The unit is fitted to 4WD versions; rear-wheel-drive pickups use a different driveline layout. Using 75W-90 in a newer model out of habit. An older KUN-series specification does not automatically apply to a GUN-series vehicle. Choosing thicker oil to compensate for heat. Temperature and load justify closer monitoring, not a departure from the applicable manual. Waiting for scheduled service after water exposure or a leak. Moisture ingress and level loss require an unscheduled check regardless of mileage. Confusing transfer-case, differential, and transmission lubricants. Similar viscosity labels do not mean that the units share the same oil specification or level-setting procedure. Conclusion For a four-wheel-drive Toyota Hilux, a practical starting point is to inspect the transfer case oil every 40,000 km or 48 months and replace it according to condition or the applicable regional schedule. From 2015, the reference is about 1.0 L of Transfer Gear Oil LF SAE 75W, while earlier versions may require 75W-90. Confirm the VIN and manual before service, and do not wait for the next interval after water exposure, leakage, or a new driveline noise.
Listings for Toyota Hilux may include these trims: Adventure, GR Sport, Comfort, and GLS, among others. The current selection depends on the selected country, model year, and vehicle availability. Use the “Trim” filter to compare the available options.
Mileage should be assessed together with the vehicle’s age, condition, and service history. Compare the mileage with similar vehicles of the same model year, and check the service history and actual condition of the vehicle before buying.
Current Toyota Hilux listings on AUTO.AE are priced from 32,000 to 668,395 AED. The price depends on the model year, mileage, trim, condition, and regional specifications. These figures are based on active listings and may change.
A private seller may offer a lower price, while a showroom may provide additional services, such as financing, a warranty, or help with insurance. Terms vary, so check the information in the listing, the vehicle documents, and the seller’s details.
Check the vehicle registration card (Mulkiya), the VIN on the vehicle and in the documents, the owner’s details, the service history, and accident records. Also check for any outstanding loan, fines, or other restrictions. It is advisable to arrange an independent inspection before completing the purchase.
Yes. You can arrange an independent technical inspection with the seller at a service centre of your choice. The inspection can help assess the condition of the engine, transmission, bodywork, electronics, and other components.
GCC Specs means that the vehicle was manufactured to specifications for Gulf Cooperation Council markets. These versions are generally designed for local climate conditions. However, GCC Specs alone does not confirm the vehicle’s condition or mean that it has a valid warranty; these points should be checked separately.
Some showrooms offer financing. If available, the terms or an estimated monthly payment may be shown in the listing. The final interest rate and approval depend on the bank, the down payment, and the buyer’s details.
