Mercedes-Benz GLE Coupe AMG 43 AMG I (C292)
Mercedes-Benz GLE43AMG Coupe Model : 2017 Milage : 139.000 KM Specs : GCC Full Service 2 KEY مرسيدس بنز GLE43AMG كوب موديل : 2017 عداد المسافة : 139.000 الف كيلو مواصفات خليجية مفتاحين الوكالة السيارة بحالة الوكالة بالكامل من الداخل والخارج استخدام شخصي السعر : 105.000 الف درهم
2017
139,000 km
A great way to draw attention to your offer among the rest - it will be more prominent in search results.
increases the number of views by 2 times
Be the first to know about new ads
Save your ad search filters, and find the ads you need faster.
1 - 1 ad
out of 1
Mercedes-Benz GLE Coupe AMG price starts from AED 86,000 and goes up to AED 1,399,000. Final on-road price may vary slightly based on insurance, registration, and optional accessories.
Mercedes-Benz GLE Coupe AMG SUV 5 dr.
Best place to buy
Mercedes-Benz GLE Coupe AMG Automatic
Best place to buy
Mercedes-Benz GLE Coupe AMG Petrol
Best place to buy
Mercedes-Benz GLE Coupe AMG Hybrid
Best place to buy
Mercedes-Benz GLE Coupe AMG 2026
Best place to buy
Mercedes-Benz GLE Coupe AMG 2025
Best place to buy
Mercedes-Benz GLE Coupe AMG 2024
Best place to buy
Mercedes-Benz GLE Coupe AMG 2023
Best place to buy
Mercedes-Benz GLE Coupe AMG 2022
Best place to buy
Mercedes-Benz GLE Coupe AMG 2021
Best place to buy
Mercedes-Benz GLE Coupe AMG 2020
Best place to buy
Mercedes-Benz GLE Coupe AMG 2019
Best place to buy
Mercedes-Benz GLE Coupe AMG 2018
Best place to buy
Mercedes-Benz GLE Coupe AMG 2017
Best place to buy
Mercedes-Benz GLE Coupe AMG 2016
Best place to buy
Mercedes-Benz GLE Coupe AMG Sharjah
Best place to buy
Mercedes-Benz GLE Coupe AMG Abu Dhabi
Best place to buy
Mercedes-Benz GLE Coupe AMG Dubai
Best place to buy
Mercedes-Benz GLE Coupe AMG Riyadh
Best place to buy
Mercedes-Benz GLE Coupe AMG Muscat
Best place to buy
Mercedes-Benz GLE Coupe AMG Ajman
Best place to buy
Mercedes-Benz GLE Coupe AMG Jeddah
Best place to buy
Mercedes-Benz GLE Coupe AMG Barkā’
Best place to buy
The chart shows the dynamics of the model's average price on the used market over the past year. This data helps you assess whether the purchase is attractive and forecast the car's future value.
Prices on AUTO.AE may differ from the actual selling price. Data is based on our database of sold vehicles and current listings. For an accurate estimate, use our tool.
Replace Mercedes-Benz GLE Coupé AMG brake pads and rotors according to their condition, rather than a single mileage figure. Urban driving can wear the linings gradually, while repeated hard stops may cause heat damage that requires attention sooner. Inspect every pad, measure the rotors and check caliper operation before deciding what to replace. This article covers AMG versions of the C292 and C167 GLE Coupé. GLE 43, GLE 53 and GLE 63/63 S models use different brake packages; the GLE 53 HYBRID plug-in model and any fitted carbon-ceramic system also require separate consideration. The model name starts the parts search, but cannot replace the VIN and equipment codes. In brief. There is no universal replacement mileage. Assess pads and rotors by wear, damage and the limits for the exact part. Generous lining thickness does not rule out overheating, binding or rotor damage. Identify the Fitted Brake Package First Record the VIN, build year, full AMG designation and installed part numbers before ordering. Compare these with the catalogue: a previous owner may have changed the calipers or rotors. Caliper colour, wheel diameter and an AMG badge do not establish compatibility on their own. Pads must match the specific caliper and rotor material. For rotors, check thickness, height, mounting and construction as well as outside diameter. Wear sensors and fitting hardware must also match the assembly. A part for a conventional GLE with AMG Line styling is not automatically suitable for a Mercedes-AMG model. C292. Identify whether the brakes belong to a GLE 43, GLE 63 or GLE 63 S; do not transfer part numbers between variants. C167. Match the exact GLE 53 or GLE 63/63 S variant, model year and factory options. GLE 53 HYBRID. Check its own parts applicability; regenerative braking does not remove the need to inspect the friction brakes. Modified systems. Follow the specifications of the actual fitted kit and its manufacturer. Metallic and Carbon-Ceramic Rotors Metallic rotors are assessed for thickness, geometry and surface condition. A carbon-ceramic package requires the manufacturer’s separate inspection method; a conventional thickness measurement is not enough. A drilled surface does not prove that a rotor is ceramic. Establish the material before dismantling the assembly or selecting pads. When Replacement Is Necessary In the March 2021 GLE Coupé C167 manual, the Check brake pads See Owner’s Manual message means the pads have reached their wear limit and a qualified workshop should be consulted. Use the document for your own model year. A pad warning does not show the remaining rotor thickness. Friction material has reached the limit for the fitted package, or is damaged or contaminated. A metallic rotor has reached its minimum thickness, or its geometry is outside the service tolerance. Cracking, surface breakdown or heat damage makes continued use of the component unsafe. Binding or a mounting fault has already damaged a pad or rotor; the cause needs correction alongside replacement. The absence of a dashboard message does not replace inspection: an inner pad may wear differently from the outer one. Arrange a prompt check when a warning appears. If grinding, strong pull, smoke or a clear loss of braking occurs, stop safely and seek assistance. Key rule. Replace pads as an axle set and rotors as an axle pair. Fit new pads when replacing rotors. First correct a caliper fault, contaminated hub face or any other cause of damage. What the Workshop Should Measure With the wheels removed, inspect every pad and both rotor faces. On a metallic rotor, take several micrometer readings on the swept surface, clear of the outer lip. Compare the lowest reading with MIN TH and the manufacturer’s specifications. Ask for the results to be recorded for each wheel. Why an Inner Pad Can Wear Faster Different lining thicknesses call for a mechanism check. Inspect the slides, piston and boots on a floating caliper, and piston operation on both sides of a fixed caliper. Check that pads move freely in their seats and that retaining hardware is sound. New pads will not prevent overheating if restricted movement remains. Handling a Carbon-Ceramic System The 2021 Mercedes-AMG GLE Coupé supplement specifically warns that a wheel rim can damage a ceramic rotor during wheel removal. Tell the workshop which system is fitted before work starts. Assess wear and damage using its service instructions; conventional metallic-rotor resurfacing does not apply to ceramic rotors. Noise and Vibration Need Different Checks Record whether the symptom began after washing, extended parking, light pedal pressure or hard braking. Note whether vibration is felt in the steering wheel, pedal or body. Even with performance brakes, a persistent new noise should not be dismissed as an AMG characteristic without inspection. Why New Rotors May Not Cure Pulsation Possible causes include rotor thickness variation, pad-material deposits, contamination at the mounting face or hub play. Clean and inspect the hub before fitting new components, then check runout after assembly. Correct, even wheel-fastener tightening matters too; otherwise the complaint may return. Conditions That Shorten AMG Brake Life repeated hard deceleration from high speed; frequent braking in dense urban traffic; heavy loads, permitted trailer use and long descents; binding pistons, caliper slides or pads; extended parking with wet metallic rotors; sand, dirt and trapped debris in the brake assembly; unsuitable friction material or installation errors. After demanding driving, watch for changes in pedal feel, vibration and an overheated smell. Do not spray water onto hot rotors. Sand or mud exposure calls for inspection and cleaning. On a GLE 53 HYBRID, thick linings do not rule out corrosion of metallic rotors: inspect their surfaces even when regeneration is used frequently. Parking Brake Procedures and Bedding Rear-brake work must follow the procedure for the fitted parking-brake mechanism. Use an electric actuator’s service mode where required by the repair instructions; do not force a piston back without preparation. After assembly, check pedal feel, leaks and parking-brake operation. Follow the kit’s bedding instructions and avoid unnecessary hard stops. Workshop Checklist Agree on diagnosis of the wear causes before ordering parts. The workshop must account for the lifting procedure on an air-suspension vehicle and the permitted brake-test method for its all-wheel-drive system. ☐ Confirm the VIN, C292 or C167 generation, AMG variant and brake type. ☐ Record symptoms and when they occur, including recent overheating. ☐ Read system messages and retain diagnostic results before dismantling. ☐ Inspect every pad, both rotor faces and caliper condition. ☐ Measure metallic rotors; inspect ceramic rotors using their separate procedure. ☐ For pulsation, check thickness variation, runout and hub condition. ☐ Inspect pistons, boots, pad seats, retaining hardware and slides. ☐ Verify the applicability of pads, rotors, sensors and fitting hardware. ☐ Follow the parking-brake procedure and specified tightening torques. ☐ Check pedal feel, leaks and brake forces, then complete bedding. Mistakes to Avoid ordering parts solely from an AMG badge or caliper colour; replacing one pad or one rotor instead of an axle set; applying conventional resurfacing or a universal thickness limit to ceramic rotors; installing new components without correcting binding or hub contamination; treating a cleared warning as proof that the repair is complete; testing at speed with a leak, changed pedal feel or an overheated wheel. Important. Grinding, strong pull, a leak, smoke from a wheel or a clear loss of braking calls for a safe stop and workshop assistance. Follow the vehicle instructions for a red warning. Do not continue driving with faulty brakes or test them at speed. Conclusion Measurements and inspection determine when GLE Coupé AMG brakes need replacement. Identify the variant and rotor material first, then check every pad, the calipers and the hubs. Overheating calls for inspection of the whole assembly, not just lining thickness. Correct the cause of damage before fitting replacement axle sets. If you are choosing a used GLE Coupé AMG, current listings can help you compare versions. Before buying, request the brake repair history, installed part numbers and recorded measurements. Pay particular attention to modified or carbon-ceramic systems: the appearance of the wheels cannot reveal their remaining service life.
Mercedes-Benz GLE Coupe AMG differential oil should follow the schedule for the fitted assembly. There is no single interval covering AMG 43, 53 and 63 models across both generations: the VIN, differential design and operating conditions matter. Check the front and rear units separately. Leaks, water exposure or a new hum require inspection regardless of scheduled mileage. How Do You Establish the Oil Change Interval? Start with the vehicle generation. C292 and C167 models can have different differentials and fluid requirements. AMG, 4MATIC and 4MATIC+ badges do not fully identify the service operation. Ask the workshop to check the VIN for additional maintenance tasks, time and mileage limits, and whether a separate running-in oil change applies to your version. The Mercedes-AMG GLE owner’s manual explains that equipment depends on the model and specification, and that the AMG supplement accompanies the main manual and service documents. This linked edition covers the 167 family. It does not establish one differential oil change interval for every GLE Coupe AMG. A general recommendation of every 40,000–60,000 km therefore cannot be presented as the factory schedule for the whole range. Nor should an initial change specified for a C-Class or GLC AMG automatically be applied to a GLE Coupe. If a workshop suggests preventive servicing ahead of the documented schedule, ask what supports that recommendation and agree on the next inspection. What If the Maintenance History Is Unknown? Check itemised invoices. A transmission-fluid-change entry may cover only the automatic gearbox. Differential records should identify the date, mileage and fluid used separately. If there is no evidence, begin with an inspection of the assemblies and their oil tightness, then agree on servicing. Quiet operation does not prove that the oil level or approval is correct. Important. AMG Line is an equipment package and does not establish that the rear differential matches a Mercedes-AMG unit. Even within the AMG range, a 43, 53 or 63 badge is insufficient for fluid selection: identify the assembly and confirm its VIN-specific application. When Is an Unscheduled Inspection Needed? Oil lubricates the final-drive gears and differential bearings and helps carry heat away from loaded surfaces. A leak reduces the available quantity, while water and contamination compromise lubrication. Clear signs of a fault call for attention before the next scheduled service. Dark oil alone does not determine when replacement is due. Level, contamination, smell and the type of metal particles also matter. Fine paste on a magnet needs a different assessment from large sharp fragments. If abnormal debris appears during draining, ask for photographs and inspection findings to be retained. Fresh fluid cannot reverse mechanical wear. How Do Heat and Load Affect Servicing? Towing, sustained driving with a full load, frequent hard acceleration and sand driving can increase drivetrain demand. Tell the workshop if your GLE Coupe AMG sees this use, particularly in hot weather. Agree on additional checks or servicing using the actual operating conditions and documentation for the specific version. Long stationary periods in traffic do not mean the differential is continuously working under load: the final-drive gears are not turning when the wheels remain still. Engine-oil intervals cannot therefore be applied directly to differentials. After flooding or an underbody impact, prompt inspection takes priority over waiting for a planned oil change. Which Oil Does a GLE Coupe AMG Need? Start with Mercedes-Benz Sheet 231.1, which distinguishes front and rear differentials, standard units and special applications. The examples below are not a universal oil set for every GLE Coupe AMG. Match each entry to the fitted assembly. These examples list 75W-85 for 239.71, 239.72 and 235.75, and 75W-140 for 235.61. Matching viscosity does not establish an identical approval. Do not choose thicker oil because of the heat or add a friction modifier without a manufacturer requirement. Once the required approval is established, verify the exact oil name in the current approved-product list. Check applicability separately for later hybrid versions and previously replaced assemblies. A container labelled suitable for Mercedes-Benz does not establish compatibility. If the workshop proposes a different product, ask to see its approval and the basis for using it in your differential. Why Are the Front Differential and Transfer Case Separate? An all-wheel-drive GLE Coupe AMG has front and rear differentials that transmit torque to the wheels on their respective axles. The transfer unit participates in transmitting torque between the axles. These are separate service points. Do not select automatic-transmission or transfer-case fluid for a differential simply because all belong to the drivetrain. Note. Refill quantity, the level-setting method and plug tightening torque come from the assembly-specific repair procedure. The amount drained after a leak does not establish the correct refill quantity. Replace seals and plugs wherever the procedure requires it. Checklist After an Oil Change ☐ The invoice identifies the differential serviced: front, rear or both. ☐ The oil name, approval and quantity are recorded for each assembly. ☐ Any leak cause has been addressed, and ventilation and seals checked. ☐ Unusual particles or signs of water have been assessed and documented. ☐ The level has been set to the procedure and oil tightness checked after filling. ☐ The date, mileage and agreed next inspection or replacement are recorded. Will New Oil Cure a Hum or Jerking? Fresh fluid cannot restore damaged gear teeth or bearings. A noise complaint needs diagnosis before treating an oil change as the solution. Note whether the sound changes under acceleration, while coasting, during turns or after warming up. For jerking, also check the tyres and other all-wheel-drive components. Rear-differential oil cannot correct a transfer-unit fault. When browsing current listings for a Mercedes-Benz GLE Coupe AMG, request detailed drivetrain service records and an underbody inspection. Ask whether a differential has been replaced and which assembly is fitted now. A recently cleaned housing and fresh oil do not replace a pre-purchase check. Stop driving if there is severe grinding, knocking or substantial oil loss, and arrange suitable recovery. Conclusion Establish the GLE Coupe AMG oil change interval from the VIN and the schedule for its differential. Select fluid separately for the front and rear units, keep maintenance records and investigate leaks promptly. A new hum needs diagnosis, not just fresh lubricant.
Change the transfer case oil in a Mercedes-Benz GLE Coupe AMG according to the requirements for the specific vehicle. Selecting the fluid and timing requires the VIN, generation, engine and installed assembly details. A GLE 53 or GLE 63 badge alone is insufficient because different all-wheel-drive configurations can have different requirements. Start with the service history. An invoice recording an automatic gearbox oil change does not confirm that the transfer case was serviced. Judder when turning, humming or leakage calls for diagnosis first. This guide explains how to check the schedule, select the fluid and agree on the work with the workshop. Key point. Check fluid approval and replacement timing separately. The engine and transfer case configuration matter for C167; a 4MATIC badge cannot establish the requirements for an earlier generation. Identify the GLE Coupe AMG Transfer Case The transfer case helps transmit torque between the axles. Its configuration matters for servicing, not just engine output or the number of gears. Ask the workshop to identify it from the VIN and compare the information with the assembly actually fitted, particularly if the vehicle has undergone repairs. C292 generation. Check the transmission documentation for the earlier GLE Coupe AMG. A fluid approval found for the 167 family should not automatically be applied to this generation. C167 generation. Establish the engine and whether the transfer case uses Torque-on-Demand, which distributes torque as required. This configuration has a separate entry in the fluid application sheet. Hybrid versions and replacement assemblies. Verify the complete derivative designation and assembly number. A shared 53 badge or similar appearance does not establish an identical service procedure. Separate the Transfer Case and Differentials in the Estimate Ask for separate entries for the automatic gearbox, transfer case, front differential and rear differential. A fluid intended for one does not become suitable for all the others. If offered a “complete transmission service”, clarify which fluids will be replaced, where levels will be checked and which sealing parts are needed. When to Arrange an Unscheduled Inspection Before the visit, note when the symptom appears: cold or after driving, under acceleration or while coasting, in a straight line or when turning. Mention recent tyre changes and chassis repairs. This helps the workshop reproduce the problem and distinguish diagnostic work from routine maintenance. Low-speed judder with the wheels turned. Start by checking tyres, pressures and wear. A staggered setup is acceptable when the size combination is approved; identical tyre widths are not a universal requirement. Humming or vibration under load. Assess the propeller shafts, driveshafts, mountings and bearings alongside the transfer case. Sound alone cannot reliably identify the faulty assembly. Fresh oil marks underneath. Locate the source and assess the fluid level in the relevant assembly. Topping up without addressing the leak does not replace repair. Underbody impact or water exposure. Inspect the housing, seals and possible fluid contamination. On a hybrid version, an underbody impact also requires attention to high-voltage system safety requirements. Important. With severe jolts, substantial oil loss or difficulty moving, stop in a safe place and arrange an assessment. A fluid change cannot repair mechanical damage. Selecting the Correct Transfer Case Oil Official Mercedes-Benz sheet 231.1, page 12, lists the following series 167 and engine combinations under transfer cases with Torque-on-Demand. Before applying this table, the workshop should confirm that this is the assembly fitted. Source: sheet 231.1, page 12, row 7. These entries do not automatically cover C292, other engines or a different transfer case configuration. Establishing the Replacement Interval Request the VIN-specific service sheet, including additional driveline operations. Clarify whether it specifies an oil change, level check or inspection. Where both time and mileage limits apply, account for both. A general service stamp does not replace a recorded transfer case operation. MB 239.41 identifies a fluid requirement, not a replacement interval. If the history is unknown, agree on an inspection, leak checks and subsequent maintenance. Do not assign one interval to every GLE Coupe AMG simply because they all have all-wheel drive. For use in the UAE, discuss sustained loads in hot weather, towing and track driving where applicable. The September 2024 Mercedes-AMG GLE owner’s manual supplement requires servicing at a qualified specialist workshop. Establish the interval for your transfer case separately from the service documentation. What to Agree Before the Oil Change Record the complete fluid name and confirmed approval. Colour, an ATF label or “for Mercedes” wording does not establish compatibility. If an alternative product is proposed, ask the workshop to verify its approval and applicability to the installed assembly. Confirm the quantity for a service change. The capacity of a dry assembly after repair may differ from the amount used in routine draining. After a leak, replacing only the quantity drained does not establish the correct level. Agree on new sealing parts and plugs where required by the procedure. Check the level and tightening torques against the instructions for that transfer case rather than a generic method. Ask for the reason behind any flushing, additives or software operations included in the estimate. After the work, check for leaks and assess the vehicle’s behaviour. Checking the Service Outcome Owner Checklist ☐ Record the VIN, generation and exact derivative. ☐ Confirm the engine and transfer case configuration. ☐ Find the schedule and previous oil-change records. ☐ Check that the estimate lists the transfer case separately. ☐ Agree on the fluid, quantity and required sealing parts. ☐ Describe symptoms, tyres and operating conditions. ☐ Obtain a job record showing the date, mileage and fluid name. ☐ Confirm the inspection and road-test findings. ☐ Record the next inspection or service due point. Common Servicing Mistakes Selecting fluid from the AMG badge without checking the generation and installed transfer case. Carrying over fluid and service requirements from a GLC, a regular GLE or another GLE Coupe generation. Treating turning judder as sufficient reason to replace the transfer case without tyre checks and diagnosis. Accepting a general “transmission oil changed” entry without a list of serviced assemblies. Conclusion Correct GLE Coupe AMG transfer case servicing starts with assembly identification. Select the fluid approval, check the schedule and agree on the work required. Investigate leakage or changes in vehicle behaviour before treating the visit as routine maintenance. A detailed job record allows you to verify the completed operations and plan the next service. When reviewing current offers for the Mercedes-Benz GLE Coupe AMG, compare the all-wheel-drive service records. Mileage, the fluid used and an identified assembly tell you more than a general maintenance stamp.
Listings for Mercedes-Benz GLE Coupe AMG may include these trims: GLE 53 4MATIC+, AMG GLE 43 4MATIC Special Edition, GLE 63 S 4MATIC+, and AMG GLE 63 S 4MATIC Special Edition, among others. The current selection depends on the selected country, model year, and vehicle availability. Use the “Trim” filter to compare the available options.
Mileage should be assessed together with the vehicle’s age, condition, and service history. Compare the mileage with similar vehicles of the same model year, and check the service history and actual condition of the vehicle before buying.
Current Mercedes-Benz GLE Coupe AMG listings on AUTO.AE are priced from 86,000 to 1,399,000 AED. The price depends on the model year, mileage, trim, condition, and regional specifications. These figures are based on active listings and may change.
A private seller may offer a lower price, while a showroom may provide additional services, such as financing, a warranty, or help with insurance. Terms vary, so check the information in the listing, the vehicle documents, and the seller’s details.
Check the vehicle registration card (Mulkiya), the VIN on the vehicle and in the documents, the owner’s details, the service history, and accident records. Also check for any outstanding loan, fines, or other restrictions. It is advisable to arrange an independent inspection before completing the purchase.
Yes. You can arrange an independent technical inspection with the seller at a service centre of your choice. The inspection can help assess the condition of the engine, transmission, bodywork, electronics, and other components.
GCC Specs means that the vehicle was manufactured to specifications for Gulf Cooperation Council markets. These versions are generally designed for local climate conditions. However, GCC Specs alone does not confirm the vehicle’s condition or mean that it has a valid warranty; these points should be checked separately.
Some showrooms offer financing. If available, the terms or an estimated monthly payment may be shown in the listing. The final interest rate and approval depend on the bank, the down payment, and the buyer’s details.
