Willys CJ
Willys CJ•
•58 views
$11,000 USD | Sold
This 4x4 1951 Willys CJ3A is finished in gray with a smooth gray interior. It is powered by its original 133.9ci 4-cylinder engine and a 3-speed manual transmission. This Willys comes equipped with heavy duty Selectro manual locking hubs and a twin-stick transfer case.
https://www.barrett-jackson.com/scottsdale-2018/docket/vehicle/1951-willys-cj3a-214435
Cost
40,398 AED
$33,000 USD | Sold In 1959, a Gala edition, with striped seats and fringed top, was added fto the export line. Later that year it was marketed domestically as the Surrey. Approximately 1,100 were manu
$38,500 USD | Sold Vehicle has been in the same family for over 40 years. This is a painstaking, nut and bolt, every attention to detail restoration. Features new custom interior, 4x4, new oak show be
$12,100 USD | Sold This beautiful, go-anywhere open-top utility 4x4 received a body-off rehab and was freshly painted, and has a beautiful interior with a toolbox beer cooler located under the passeng
$17,600 USD | Sold Professionally built, body-off rotisserie restoration. Powered by a rebuilt legendary 289 4V engine with ceramic headers and heavy-duty aluminum radiator. Getting the power to the 3
Chassis No.: 10958WILLYS $19,800 USD | Sold • Willys’ Defining Vehicle • Authentic US Military Artifact • Wonderfully Preserved Example • A Snapshot of History • 134 CID Hurricane Inline 4-Cylinder F-
Chassis No.: 57548153839 Auction: Indy 2018 Auction date: May 20, 2018 Lot No.: T128 $22,000 | Sold • Transmission: Manual • Exterior: Red • Interior: Black • Discovered in Paradise Valley, AZ in supe
$15,950 USD | Sold This 1948 Willys CJ2A has been fully restored, including fresh paint, in an MB tribute theme, interior trim, rebuilt steering box and shaft, rebuilt starter, resealed transmission a
$23,100 USD | Sold This custom 1963 Willys Jeep pickup underwent a frame-off restoration and is powered by a Windsor 351ci engine backed by a T19 4-speed manual transmission with a T18 twin-stick tran
$11,000 USD | Sold During the two-year-old restoration, the very rare body was removed and painted. The engine and driveline were not touched. Equipped with a 4-cyllinder Flathead engine, it features
Chassis No.: CJ2A33447 US$5,040 USD | Sold • 134ci L-Head Inline 4-Cylinder Engine • Single Carburetor • 60bhp at 4,000rpm • 3-Speed Manual Transmission • 4-Wheel Drive • 4-Wheel Drum Brakes • Offered
$112,200 USD | Sold This is a four-year, nut-and-bolt rotisserie restoration with every nut, bolt, screw and wire restored to the highest degree possible. It is powered by an original 226ci inline 6-c
$27,500 USD | Sold The godfather of modern SUVs this Willys Wagon traces its roots to 1946. Professionally restored, this is a great example of the way SUVs were in 1960. The professionally rebuilt Co
Chassis No.: 145483 $29,120 USD | Sold • First Postwar Civilian Jeep with Split Windshield • Beautifully Presented Older Restoration • Highly Sought-After and Collectible • Attractive Maroon over Gray
$27,500 USD | Sold As one of only 8,968 examples built, this 1960 Willys Jeep wagon with its 3.7-liter, straight-6 Hurricane engine was produced in 1960. Not much is known of the first years of its li
$44,000 USD | Sold Willys wagon that has had a frame-off restoration. New DANA 44 rear end installed with over 1,000 hours in the chassis alone. Everything was smoothed and powder coated gloss black.
$33,000 USD | Sold This 1948 Willys Jeep pickup is an early-production civilian cab and chassis example powered by the correct Willys L134 'Go-Devil' inline-4 engine paired with a 3-speed manual trans
